[arm-allstar] CTCSS on Courtesy and ID when in use

[Doug Crompton]

Just to make you aware that the Hamvoip code can already generate DTMF -

Example -   rpt cmd 1998 cop 48 1,2,3,A,4,5,6,B,7,8,9,C,*,0,#,D

Replace 1998 with your node number and the DTMF valid characters with
whatever sequence you want to send.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Fri, Dec 27, 2019 at 2:07 PM "Steve Smith via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hi Steve,
>
> Perhaps you could use K8UT's  PiTone program to accomplish this.  PiTone
> can be used to generate a CTCSS (PL) tone using a Raspberry Pi and a
> Digital to Analog Converter.  We use it to generate transmit CTCSS
> together with HamVOIP to control our Yaseu DR-1X repeater.  We have just
> updated our PiTone program to Version 3.
>
> Version 3 can be configured to:
>
> - Generate a continuous CTCSS tone.
> - Generate a CTCSS tone which follows the received CTCSS tone.
> - Generate a CTCSS tone which follows the received CTCSS tone with a
> settable on-time delay at
> the end of the received CTCSS tone.
>
> You can download the PiTone_V30 source file, executable file and user's
> manual from www.hamprojects.info
>
> 73,
> Steve - N8AR
>
>
>
> ------ Original Message ------
> From: "David McGough via ARM-allstar" <arm-allstar at hamvoip.org>
> To: "Steve Daniels via ARM-allstar" <arm-allstar at hamvoip.org>
> Cc: "David McGough" <kb4fxc at inttek.net>
> Sent: 12/6/2019 8:39:39 PM
> Subject: Re: [arm-allstar] CTCSS on Courtesy and ID when in use
>
> >
> >Hi Steve,
> >
> >I can't think of any way to do this with the current software. BTW, for
> >normal US regulations, the repeater isn't required to ID at all when it's
> >sitting idle and the TX has not been in use.
> >
> >
> >73, David KB4FXC
> >
> >
> >On Sat, 7 Dec 2019, "Steve Daniels via ARM-allstar" wrote:
> >
> >>  Hi
> >>  I am new to the system, I have searched and see it might be possible
> >but have no details.
> >>  I am trying to have CTCSS active for the courtesy K tone and ID when
> >the repeater is in use, but to ID without CTCSS when the repeater is not
> >in use.
> >>
> >>  A tail on the TXCTCSS would work for me.
> >>
> >>  Can anyone please point me in the direction of info that would help me.
> >>
> >>  Regards
> >>  Steve
> >>  G6UIM
> >>
> >>  _______________________________________________
> >>
> >>  ARM-allstar mailing list
> >>  ARM-allstar at hamvoip.org
> >>  http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >>  Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >>
> >
> >_______________________________________________
> >
> >ARM-allstar mailing list
> >ARM-allstar at hamvoip.org
> >http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> >Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>