[arm-allstar] 2 private nodes same server connection fail

[John "Jason" Gnatowsky]

Yes, i got it. Turns out that it was a sausage finger combined with aging eyes.....i had a slash where i shouldn't have.

On December 24, 2019 3:20:14 PM EST, "larry via ARM-allstar" <arm-allstar at hamvoip.org> wrote:
>Jason did you get this resolved?
>
>If not and things are as you say. As long as each node is defined in 
>rpt.conf and the [nodes] section for each NODE includes the opposite 
>info for each Radio route in each-others [nodes] list with the proper
>IP 
>and port used included.
>
>example
>12345 = radio at 192.168.4.100:4569/12345,NONE
>
>verify iax.con contains the proper bindport you've chosen to use.
>
>I'd suggest you look for a fat fingering of the data entered.
>Most common, something like a comma versus period or semi-colon vs
>colon.
>
>Larry - N7FM
>
>
>
>
>
>
>On 12/21/19 4:46 PM, "John "Jason" Gnatowsky via ARM-allstar" wrote:
>> Hey all,
>>     I've added info in NODES stanza, Lookup set to local,
>extensions,iax,rpt all look correct. I don't have access to the others
>I've built at the moment to compare my files. Anyone got an idea on
>something stupid i overlooked?
>> Jason Gnatowsky------KG4FJC
>> 
>_______________________________________________
>
>ARM-allstar mailing list
>ARM-allstar at hamvoip.org
>http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>Visit the BBB and RPi2/3/4 web page - http://hamvoip.org

-- 
Jason Gnatowsky------KG4FJC