[arm-allstar] OpenVPN (Mobile) and Personal VPN Server using Asus router @ home

[Tom Eaton]

Hi Travis

I have done the same thing with a vpn and it works fine, I have openvpn
client running on the remote/mobile node, you need to make sure you change
the astport to a different port then your home node. I use my Netgear
router as the vpn server and port forwarding to the private address the
router gives your vpn client. Be sure to put open vpn in your rc file so
when your pi boots it connects at boot.

Tom



Tom, KC4CBQ

On Thu, Dec 5, 2019, 2:08 PM "Doug Crompton via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Travis,
>
>    Other than it is (sometimes) fun to play with this stuff and try to make
> things work why are you concerned that someone out there cannot connect to
> you? You have a home node that anyone can connect to. You can connect to
> it. If anyone wants to connect to you have then connect to your home node.
> If you are online with your hotspot and connected to your home node then
> they are connected to you. This is so much easier than messing with VPN's
> and port forwards on hotspots that seldom work.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
>
> On Thu, Dec 5, 2019 at 1:36 PM "Travis French via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > Good Afternoon,
> >
> > I am following up on my original email as I am still having an issue with
> > incoming connections to my mobile node. Outgoing works great as always
> > expected. It is connected through OnStar's 4GLTE if that makes a
> difference.
> >
> > So, I originally connected my mobile mode to my home VPN that is built
> > into my Asus router. It was showing my "home" IP address in Supermon so I
> > thought I was there. Maybe too easy. No incoming connections. I quickly
> > assumed I needed to add entries to the rpt.conf file since my home and
> > mobile node had the same WAN IP address. Not the case. No incoming
> > connection local or otherwise.
> >
> > Thinking maybe that the Asus VPN server was the issue, I set up another
> > dedicated Raspberry Pi this week running PiVPN. Of course, I turned off
> the
> > Asus VPN. Both options work great for access to my LAN remotely. And in
> > both cases, my WAN IP looks as though I am at home. In both cases still,
> I
> > cannot receive incoming connections on my mobile node local or otherwise.
> >
> > I have all applicable ports forwarded to my local VPN IP address.
> > Hopefully that is correct?? I have also switched off my firewall and set
> > the VPN to DMZ temporarily to see if that was the issue. No luck.
> >
> > At this point, I am feeling really silly and must be missing something
> > fundamental.
> >
> > I am not a network expert but I am learning a lot. Any guidance or nudge
> > in the right direction would be greatly appreciated.
> >
> > Thank you very much in advance,
> >
> > Travis K2PCB
> >
> >
> > -----Original Message-----
> > From: Travis French
> > Sent: Thursday, November 21, 2019 1:47 PM
> > To: 'ARM Allstar' <arm-allstar at hamvoip.org>
> > Subject: OpenVPN (Mobile) and Personal VPN Server using Asus router @
> home
> >
> > Good Afternoon,
> >
> > I periodically read about people referencing the use of a VPN and from
> > what I am gathering, this is allowing them to make their mobile node
> > visible so that it can be connected to. Correct me if I am wrong.
> >
> > I have OpenVPN capability through my ASUS router at home which works
> great
> > already and allows me access to my home network. I guess I am having
> > trouble even after reading through the OpenVPN documentation on how to
> set
> > this up so that my mobile node can use this VPN and instead of seeing my
> > network be seen by the internet. Again, am I wrong in thinking that this
> is
> > even possible?
> >
> > My questions:
> >
> > Has anyone down this using the VPN server in their home router?
> > Do I need to run a different type of VPN server or standalone server on
> > another pi?
> > Is setting up a home server a waste of time in lieu of a commercial VPN
> > service from a performance perspective?
> > Once set up, can I assume that my mobile node then have a static IP
> > address that would be my home IP on a different port?
> >
> > I was wondering is someone could point me to a resource that could help
> me
> > answer some of these questions and/or steer me in the direction of a
> setup
> > guide?
> >
> > Thank you in advance,
> >
> > Travis K2PCB
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>