[arm-allstar] Timeout Logging

[Doug Crompton]

Adam,

rx_timeout is based on cos and tx_timeout on PTT. If you haven't changed
from the defaults the rx_timeout should be
5 minutes (300000 seconds) and the tx_timeout is usually set to three
minutes. The purpose of rx_timeout is to release a node from hanging a
circuit if its cos is longer than 5 minutes. I believe either will display
a message in the client if you have that open when it occurs. I don't
believe there is any other logging.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Tue, Dec 3, 2019 at 2:08 PM "Pawlowski, Adam via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hello all,
>
> Should I expect to be able to find something in Asterisk's message or
> event logging? I'm trying to chase down a report of a timeout on a
> connected repeater, to see if it were in the transmitter or if we timed out
> in Asterisk, but I don't see any messaging. Not sure if I should though.
>
> I see some allusions to RX timeout/COS timeout which shouldn't have come
> up, if those are still part of the current code.
>
> Adam
> KC2YQF
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3/4 web page - http://hamvoip.org
>