[arm-allstar] On the hour ID

[Doug Crompton]

Tim,

 Not familiar with interfacing to that controller but  duplex=0  turns off
all telemetry.  Do you have linktolink=yes  ?   Not sure if that would help
but maybe in the previous setup you were not using duplex=0 ??    duplex=1
and lintolink=yes  might be what is needed. Worth a try.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Mon, Aug 19, 2019 at 12:54 PM "Tim Webb via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I had an SD card failure over the weekend and have everything back up and
> running again. It has been a while since I set up a server from scratch. I
> am running a RB-RIMLite-RC210 plugged into port 2 on the Arcom controller.
> Port 1 is a 224.960/R. The only problem I see that I'm having is with no
> time and wx at the top of each hour. When I send *81 or 82 I don't get the
> voice on the repeater but my asterisk cli shows that it is playing and the
> DTMF are working good. I did notice that if I send *81 or 82 and wait a
> couple of seconds and send *A9 I get the wx portion playing on the repeater
> before I get my voice echo back on the repeater. I know it's probably
> something simple but any suggestions are as always appreciated.
> RPT.CONF rxchannel=SimpleUSB/usbDuplex=0
> If more info is needed just let me know.
>
>
> 73
> Tim Webb - KK4WH(606)909-2094
> https://www.qrz.com/db/KK4WHwww.facebook.com/kentucky220
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>