[arm-allstar] help with private node setup

[Tom Eaton]

Ok  guys I found the problem, had the word none in lower case.

It now works, but how to keep it from showing up on lsnodes or bubble chart?

Tom

On Sat, Aug 3, 2019 at 6:30 PM Tom Eaton <kc4cbq at gmail.com> wrote:

> I tried that Doug and still no lookup, I have this set to not register
> with Allstar.
> Any other thoughts about what I mite be doing wrong?
>
> And this is what I get from CLI David
>
>
>
>
> =========================================================================
> Connected to Asterisk
> 1.4.23-pre.hamvoip-V1.5.3-58-app_rpt-0.327-07/22/2019 currently running on
> KC4CBQ (pid = 343)
> Verbosity was 3 and is now 4
> KC4CBQ*CLI> rpt lookup 47862
> Node:  1111, Method:   DNS, Actual: LOCAL, Data:
> radio at 192.168.1.54:4570/47862,NONE
> Node:  1999, Method:   DNS, Actual: LOCAL, Data:
> radio at 192.168.1.54:4570/47862,NONE
>     -- Remote UNIX connection
>     -- Remote UNIX connection disconnected
>   == Manager 'admin' logged on from 127.0.0.1
>   == Manager 'admin' logged off from 127.0.0.1
>   == Manager 'admin' logged on from 127.0.0.1
>   == Manager 'admin' logged off from 127.0.0.1
>     -- Call accepted by 192.168.1.54 (format g726aal2)
>     -- Format for call is g726aal2
>     -- Hungup 'IAX2/192.168.1.54:4570-5410'
>     -- Hungup 'DAHDI/pseudo-1925244378'
>     -- Hungup 'DAHDI/pseudo-1662221725'
>     -- <DAHDI/pseudo-1375522655> Playing 'rpt/node' (language 'en')
>     -- <DAHDI/pseudo-1375522655> Playing 'digits/4' (language 'en')
>     -- <DAHDI/pseudo-1375522655> Playing 'digits/7' (language 'en')
>   == Refreshing DNS lookups.
>   == Refreshing DNS lookups.
>     -- <DAHDI/pseudo-1375522655> Playing 'digits/8' (language 'en')
>     -- <DAHDI/pseudo-1375522655> Playing 'digits/6' (language 'en')
>     -- <DAHDI/pseudo-1375522655> Playing 'digits/2' (language 'en')
>     -- <DAHDI/pseudo-1375522655> Playing 'rpt/connection_failed' (language
> 'en')
>     -- Hungup 'DAHDI/pseudo-1375522655'
>     -- Remote UNIX connection
>     -- Remote UNIX connection disconnected
>   == Manager 'admin' logged on from 127.0.0.1
>   == Manager 'admin' logged off from 127.0.0.1
> KC4CBQ*CLI>
> Tom
>
> On Sat, Aug 3, 2019 at 5:07 PM "Doug Crompton via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> Tom,
>>
>>  You are trying to do a local lookup for a public node.  If you want to do
>> this leave the node_lookup_method set to dns and specify the 1111 IP
>> address and port explicitly in the [nodes] section at the end of rpt.conf.
>>
>>
>> *73 Doug*
>>
>> *WA3DSP*
>>
>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>>
>> On Sat, Aug 3, 2019 at 5:04 PM "Tom Eaton via ARM-allstar" <
>> arm-allstar at hamvoip.org> wrote:
>>
>> > I used node-config.sh
>> > node number 1111
>> > here is what I have in conf files
>> >
>> > extensions.conf
>> >
>> > [radio-secure]
>> > exten => 1111,1,rpt,1111
>> >
>> > iax.conf
>> > [general]
>> > bindport=4568
>> > bindaddr=0.0.0.0
>> >
>> > rpt.conf
>> >
>> > node_lookup_method=local
>> >
>> > 47862 = radio at 192.168.1.54:4570/47862,NONE ; this is he node to lookup
>> >
>> > when I do a lookup I get
>> >
>> > AllStar Node Number Search for: "47862"
>> > ---------------------------------------
>> >
>> > ....Nothing Found....
>> >
>> >
>> > Can someone help me
>> >
>> >
>> > Tom
>> > _______________________________________________
>> >
>> > ARM-allstar mailing list
>> > ARM-allstar at hamvoip.org
>> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> >
>> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
>> >
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
>