[arm-allstar] help with private node setup

[Tom Eaton]

I tried that Doug and still no lookup, I have this set to not register with
Allstar.
Any other thoughts about what I mite be doing wrong?

And this is what I get from CLI David




=========================================================================
Connected to Asterisk 1.4.23-pre.hamvoip-V1.5.3-58-app_rpt-0.327-07/22/2019
currently running on KC4CBQ (pid = 343)
Verbosity was 3 and is now 4
KC4CBQ*CLI> rpt lookup 47862
Node:  1111, Method:   DNS, Actual: LOCAL, Data:
radio at 192.168.1.54:4570/47862,NONE
Node:  1999, Method:   DNS, Actual: LOCAL, Data:
radio at 192.168.1.54:4570/47862,NONE
    -- Remote UNIX connection
    -- Remote UNIX connection disconnected
  == Manager 'admin' logged on from 127.0.0.1
  == Manager 'admin' logged off from 127.0.0.1
  == Manager 'admin' logged on from 127.0.0.1
  == Manager 'admin' logged off from 127.0.0.1
    -- Call accepted by 192.168.1.54 (format g726aal2)
    -- Format for call is g726aal2
    -- Hungup 'IAX2/192.168.1.54:4570-5410'
    -- Hungup 'DAHDI/pseudo-1925244378'
    -- Hungup 'DAHDI/pseudo-1662221725'
    -- <DAHDI/pseudo-1375522655> Playing 'rpt/node' (language 'en')
    -- <DAHDI/pseudo-1375522655> Playing 'digits/4' (language 'en')
    -- <DAHDI/pseudo-1375522655> Playing 'digits/7' (language 'en')
  == Refreshing DNS lookups.
  == Refreshing DNS lookups.
    -- <DAHDI/pseudo-1375522655> Playing 'digits/8' (language 'en')
    -- <DAHDI/pseudo-1375522655> Playing 'digits/6' (language 'en')
    -- <DAHDI/pseudo-1375522655> Playing 'digits/2' (language 'en')
    -- <DAHDI/pseudo-1375522655> Playing 'rpt/connection_failed' (language
'en')
    -- Hungup 'DAHDI/pseudo-1375522655'
    -- Remote UNIX connection
    -- Remote UNIX connection disconnected
  == Manager 'admin' logged on from 127.0.0.1
  == Manager 'admin' logged off from 127.0.0.1
KC4CBQ*CLI>
Tom

On Sat, Aug 3, 2019 at 5:07 PM "Doug Crompton via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Tom,
>
>  You are trying to do a local lookup for a public node.  If you want to do
> this leave the node_lookup_method set to dns and specify the 1111 IP
> address and port explicitly in the [nodes] section at the end of rpt.conf.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Sat, Aug 3, 2019 at 5:04 PM "Tom Eaton via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > I used node-config.sh
> > node number 1111
> > here is what I have in conf files
> >
> > extensions.conf
> >
> > [radio-secure]
> > exten => 1111,1,rpt,1111
> >
> > iax.conf
> > [general]
> > bindport=4568
> > bindaddr=0.0.0.0
> >
> > rpt.conf
> >
> > node_lookup_method=local
> >
> > 47862 = radio at 192.168.1.54:4570/47862,NONE ; this is he node to lookup
> >
> > when I do a lookup I get
> >
> > AllStar Node Number Search for: "47862"
> > ---------------------------------------
> >
> > ....Nothing Found....
> >
> >
> > Can someone help me
> >
> >
> > Tom
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>