[arm-allstar] Baofeng "modless" howto

[Doug Crompton]

Jim,

 Sorry about that. I hopefully made it a little clearer. Refresh the page
and read it again.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Mon, Apr 29, 2019 at 10:46 AM James WD0JB <James.WD0JB at gmail.com> wrote:

> Doug,
>
> Thank you for posting this!  It will be very helpful in my node!
>
> I have a quick question though. On the schematic, the tx voltage divider
> is 10k/10k on r5,r6. However, in the description it says the values are
> 1k/10k and to adjust r6 for levels. Which is correct?
>
> Thanks for all you do!
>
> James WD0JB
>
> On Sun, Apr 28, 2019 at 23:19 "Doug Crompton via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> I placed a new howto on using the baofeng UV5, UV82, and others but NOT
>> the
>> 888 on the hamvoip.org web page. Here is a direct link -
>>
>> https://hamvoip.org/hamradio/Unmodified_Baofeng_Interface/
>>
>> This shows a perf board discrete assembly.
>>
>>
>> *73 Doug*
>>
>> *WA3DSP*
>>
>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
> --
> 73,
>
> James WD0JB
>