[arm-allstar] Motorola Radio

[Danny K5CG]

The Motorola CDM series are in a sweet spot for price vs. features and ease of use. The programming software can run on any version of Windows. They also support reverse burst from the PTT input alone, so you don't need full DSP (USBRadio) to do it, it works with SimpleUSB.

Danny
K5CG

----- Original Message -----
From: "ARM Allstar" <arm-allstar at hamvoip.org>
To: "ARM Allstar" <arm-allstar at hamvoip.org>
Cc: "Ron Gilson" <wa2wwk at gmail.com>
Sent: Wednesday, April 10, 2019 5:32:04 PM
Subject: Re: [arm-allstar] Motorola Radio

Not sure about the GM300, but with the Maxtrac & Radius when they are used
outside 150 to 174 mhz & 449 to 470 mhz range need to have the output power
turned down.  The auto power control only works when the radio is used in
the 150 to 174 mhz & 449 to 470 mhz.  The mod is on Repeater Builders.  You
could also get a radio which has a bad final and replace the final
transistor with a mini variable cap tuning for max power output about 2
watts.  Another idea, considerably more money, is use an Alinco which has a
DB9 with all the needed connections.  Just an idea.  I've used both.
WA2WWK  Ron

On Wed, Apr 10, 2019 at 2:05 PM "Rachid Karroo via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Hi everyone
> Thank you for your replies regarding my query about Motorola radio.
> I will finally be getting a GM300 for my simplex Node.
>
> 73's
>
> Rachid
> 3B8FP
>
>
> On Tue, Apr 9, 2019 at 6:29 PM "Fred Hillhouse via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > https://hamvoip.org/hamradio/motorola_programming/
> >
> >
> > -----Original Message-----
> > From: ARM-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
> > "David McGough via ARM-allstar"
> > Sent: Tuesday, April 09, 2019 10:19 AM
> > To: "Carlos Minguela via ARM-allstar"
> > Cc: David McGough
> > Subject: Re: [arm-allstar] Motorola Radio
> >
> >
> > Carlos,
> >
> > You may not be aware, but a programming strategy for old Motorola radios
> > is available for the HamVoIP software and is simple to use---just install
> > a software package.
> >
> > See:  https://hamvoip.org/hamradio/motorola_programming/
> >
> >
> > 73, David KB4FXC
> >
> >
> >
> > On Tue, 9 Apr 2019, "Carlos Minguela via ARM-allstar" wrote:
> >
> > > Hi Rachid:
> > I use the Motorola GM300 for my allstarlink.  It is a very good radio.Â
> > The only downside is that you need an older computer with serial port and
> > DOS to program it. Â
> > CarlosKP4CA
> > _
> >     On Tuesday, April 9, 2019, 9:52:38 AM AST, Rachid Karroo via
> > ARM-allstar
> > <arm-allstar at hamvoip.org> wrote:
> >
> >  Hi all
> > I am looking for information regarding which Motorola VHF radio can be
> used
> > on a AllStarLink.
> >
> > Anyone ?
> >
> > 73s
> >
> > Rachid
> > 3B8FP
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> >
> > ---
> > This email has been checked for viruses by Avast antivirus software.
> > https://www.avast.com/antivirus
> >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org