[arm-allstar] Supermon issues

[Jay Urish]

So theoretically,

If I wanted a site access code setup, I could add some digits like this

and make 9321 my site access code right?


93211=ilink,1
  ; monitor link = *2<node>
93212=ilink,2
  ; connect link transceive = *3<node>
93213=ilink,3
  ; remote command = *4<node>
93214=ilink,4
  ; execute macro = *5<macro#>
93215=macro,1





On 4/10/19 9:13 PM, "Doug Crompton via ARM-allstar" wrote:
> DTMF commands are mapped to ilink or other commands in the functions stanza
> of rpt.conf.  Here is an example -
>
> The DTMF command on the left preceded by the lead in character (*) is
> mapped to the command on the right.
>
> [functions]
>
>   ; disconnect link = *1<node>
> 1=ilink,1
>   ; monitor link = *2<node>
> 2=ilink,2
>   ; connect link transceive = *3<node>
> 3=ilink,3
>   ; remote command = *4<node>
> 4=ilink,4
>   ; execute macro = *5<macro#>
> 5=macro,1
>
>   ; system status
> 70=ilink,5
>   ;  disconnect permanently connected link = *71<node>
> 71=ilink,11
>   ; connect link permanent monitor = *72<node>
> 72=ilink,12
>   ; connect link permanent transceive = *73<node>
> 73=ilink,13
>   ; play full system status
> 75=ilink,15
>   ; disconnect all links
> 76=ilink,6
>   ; reconnect previously disconnected links
> 77=ilink,16
>   ; permanently monitor link – local Monitor only
> 78=ilink,18
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Wed, Apr 10, 2019 at 7:52 PM "Mike Sullivan via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> That email posted to the list about 2 hours after I solved it. Restarted
>> the node and all was fine lol. It was weird. All seems to be working now,
>> no issues yet.
>>
>> Slightly OT but since I’m replying anyways.. how hard is it to change the
>> DTMF commands?
>>
>> On Wed, Apr 10, 2019 at 19:13 "Doug Crompton via ARM-allstar" <
>> arm-allstar at hamvoip.org> wrote:
>>
>>> Mike,
>>>
>>>   The update would not have effected anything previously setup. Go over
>> the
>>> setup again. Is the allmon.ini file pointing to the correct manager Ip
>>> address? 127.0.0.1 for same server or local IP address of another server
>> on
>>> your LAN or public IP if outside. Correct user/pass and same user/pass in
>>> the manager.conf file? If the manager you are trying to reach is not on
>> the
>>> same server you need to set the bind address at that manager to 0.0.0.0
>> not
>>> 127.0.0.1. If it is outside your LAN you also need to port forward port
>>> 5038 and you should firewall it as per the howto at hamvoip.org.
>>>
>>>
>>> *73 Doug*
>>>
>>> *WA3DSP*
>>>
>>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>>>
>>>
>>> On Wed, Apr 10, 2019 at 5:45 PM "Mike Sullivan via ARM-allstar" <
>>> arm-allstar at hamvoip.org> wrote:
>>>
>>>> I'm working on setting up Supermon on our node.. been working on
>> getting
>>>> everything set up. I have the page running, been trying to figure out a
>>>> login issue, but can't figure out why. I did an update to be safe
>> (after
>>>> remembering the cosmetic update the other day) and now when I log in,
>> the
>>>> page is giving me "Could not login to Asterisk Manager".. any reason
>> why?
>>>> It was working before I ran the node update.
>>>>
>>>> Mike
>>>> _______________________________________________
>>>>
>>>> ARM-allstar mailing list
>>>> ARM-allstar at hamvoip.org
>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>>
>>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>>>
>>> _______________________________________________
>>>
>>> ARM-allstar mailing list
>>> ARM-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>
>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>>
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org