[arm-allstar] Local Ip of my lan,transmit On The Air!!!

[Gervais Fillion]

well doug,
my transceiver is always connected at the Pi,,so it should tx , the node is working no1 except this and other thing but less important.

i have nothing,no sound,,no tx without audio,,nothing.

i will check flowwing the path you gave me

thanks

gervais



________________________________
De : ARM-allstar <arm-allstar-bounces at hamvoip.org> de la part de "Doug Crompton via ARM-allstar" <arm-allstar at hamvoip.org>
Envoyé : 10 avril 2019 22:08
À : ARM Allstar
Cc : Doug Crompton
Objet : Re: [arm-allstar] Local Ip of my lan,transmit On The Air!!!

Gervais,

 The announcement of the IP address is ON by default so unless you turned
it off you should be hearing it. It plays through the first nodes radio
which of course must be on at boot to hear it. It is enabled (default) or
disabled in the /usr/local/etc/allstar.env file.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Wed, Apr 10, 2019 at 8:28 PM "Gervais Fillion via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> hi all
> i checked on the hamvoip site if there was an "how too" too set up my node
> here so when it is booting (the RPI) it is transmitting On the Air his
> local ip in my router,,192.168.0.???
> it is helpful a lot when you forget the ip!!!or the router after a while
> change it!
>
> i dont know ,where and which line must be activated,can you help me locate
> it?
>
> thanks for the help and go slowly,,linux is a world of unknown to me
>
> thanks
> gervais
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org