[arm-allstar] Duplex function not working correctly?

[Mike Sullivan]

Never thought of that idea.. it’s a possibility, but we already have the
controller here. Although that idea would work since I’d like to set up
multiple RF links to area repeaters.. now you have me thinking...

On Thu, Apr 4, 2019 at 22:54 "Doug Crompton via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I know this is not the answer you want to hear but you do know that Allstar
> in itself is a repeater controller and you could replace the expensive
> controller you are fighting with, with a PI and FOB per port linked through
> an Ethernet switch. Total cost about $80/port plus the Ethernet switch.
> Selling the controller would more than pay for the conversion. Advantage is
> you have redundancy per port and infinite expandability. Something to think
> about. Maybe in he future.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Thu, Apr 4, 2019 at 4:34 PM "Mike Sullivan via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > I'm working on our club's node.. configuration is an RC-210 controller,
> > repeater on port 1, RIM-Lite for the RC-210 on Port 3 (2 is reserved for
> a
> > link radio) I think I finally fixed the poor audio issue, but I'm still
> > having issues with courtesy beeps.
> >
> > I have the rpt.conf file duplex variable set to 0, which should be half
> > duplex, no telemetry/tones. No matter of the configuration of linktolink
> > (yes, no, or commented out) the repeater's courtesy beep is somehow being
> > looped back into the transmission as a pre-PTT beep, when it should only
> be
> > a post-PTT courtesy beep.
> >
> > If I switch to duplex=1, the controller's courtesy beep goes away.. but
> at
> > the cost of the Allstar beep, telemetry, etc (that I can comment out, I
> > know that). Now here's the weird part.. when I comment out the courtesy
> > beep in rpt.conf, the problem returns. I've checked everything on the
> > controller side, Port 3 is not set up in repeater mode so it should be
> > operating as a simplex connection.
> >
> > I'm baffled as to what's going on. Am I missing something that would
> > otherwise cause the issue
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>