[arm-allstar] Supermon stopped working after re-start
Doug Crompton
wa3dsp at gmail.com
Mon Apr 1 11:22:49 EDT 2019
Ron,
Just a little correction on that last message the firewall would ONLY lock
out internet traffic not local traffic on the same LAN. Are you trying to
access this server via the internet or locally? The server should accept
local traffic from any port even with the firewall on.
*73 Doug*
*WA3DSP*
*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
On Mon, Apr 1, 2019 at 11:16 AM Doug Crompton <wa3dsp at gmail.com> wrote:
> Ron,
>
> Yes, that is exactly what you did if you had it on a different port than
> 222 for ssh. The firewall file /etc/openvpn/firewall needs to be configured
> before turning it on!!! It disallows http and most other ports other than
> 222. So you are hosed unless you can remove that SD card and mount it on
> another Linux system and edit to turn off the firewall.
>
> BTW on a router based system there is no reason to turn on the firewall!!!
>
>
> *73 Doug*
>
> *WA3DSP*
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Mon, Apr 1, 2019 at 9:52 AM Ron Gilson <wa2wwk at gmail.com> wrote:
>
>> Good morning Doug. 41893 is wired, LEDs flashing, ip is correct when
>> announcing (192.168.1.24), Tried a new chip with new image same problem.
>> DTMF connected to 28258 same LAN connected to 27225, all seems ok ?
>> Switched eithernet cables and ports on switch, re-boot router. still can't
>> talk to port .1.24? Could it be I locked myself out when turning on
>> firewall. The only thing I have not tried replacing the pie? Any ideas
>> ??? Thanks.
>> Ron
>>
>> On Sun, Mar 31, 2019 at 6:18 PM Doug Crompton <wa3dsp at gmail.com> wrote:
>>
>>> Ron,
>>>
>>> Is this a wired or wireless connection. Does it announce an IP address
>>> when it boots? Does it show it on the LED's?
>>>
>>>
>>> *73 Doug*
>>>
>>> *WA3DSP*
>>>
>>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>>>
>>> On Sun, Mar 31, 2019 at 6:13 PM Ron Gilson <wa2wwk at gmail.com> wrote:
>>>
>>>> Also, I believe I turned on the hamvoip firewall, but everything seemed
>>>> ok until the node powered up after plugging into the UPS? I did the proper
>>>> shut down from putty? Just checked and still at same LAN IP address???
>>>> Thanks.
>>>> WA2WWK
>>>>
>>>> On Sun, Mar 31, 2019 at 5:53 PM Ron Gilson <wa2wwk at gmail.com> wrote:
>>>>
>>>>> Thanks will check in am but the node looked like it stayed at .24.
>>>>> Enjoy the balance of the weekend. 73's
>>>>> Ron WA2WWK
>>>>>
>>>>> On Sat, Mar 30, 2019 at 6:35 PM "Doug Crompton via ARM-allstar" <
>>>>> arm-allstar at hamvoip.org> wrote:
>>>>>
>>>>>> Ron,
>>>>>>
>>>>>> If you didn't turn it off the node announces its IP address at boot.
>>>>>> The
>>>>>> IP address is also sent in morse code to the Pi LED twice at boot
>>>>>> preceded
>>>>>> by HI HI. I suspect your IP address changed if you are using DHCP and
>>>>>> you
>>>>>> did not make it reserved or permanent in your router.
>>>>>>
>>>>>>
>>>>>> *73 Doug*
>>>>>>
>>>>>> *WA3DSP*
>>>>>>
>>>>>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>>>>>>
>>>>>> On Sat, Mar 30, 2019 at 6:23 PM "Ron Gilson via ARM-allstar" <
>>>>>> arm-allstar at hamvoip.org> wrote:
>>>>>>
>>>>>> > I recently set up Supermon on Node 41893. Things seemed to work
>>>>>> very well
>>>>>> > until earlier today when I decided to shut down via putty so I could
>>>>>> > re-route power thru a ups backup. After that the Supermon would no
>>>>>> longer
>>>>>> > work , putty and WinScp also could not access the node. I looked
>>>>>> on my
>>>>>> > router and the IP is correct but I'm not able to ping 41893 from my
>>>>>> LAN. I
>>>>>> > can dial up a connection to 27225 & and DTMF for ID, Time etc work
>>>>>> well.
>>>>>> > Any ideas other than start over again? My other node on same LAN
>>>>>> different
>>>>>> > LAN IP has no problem? Thanks for your help.
>>>>>> > WA2WWK Ron
>>>>>> > _______________________________________________
>>>>>> >
>>>>>> > ARM-allstar mailing list
>>>>>> > ARM-allstar at hamvoip.org
>>>>>> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>>>> >
>>>>>> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>>>>> >
>>>>>> _______________________________________________
>>>>>>
>>>>>> ARM-allstar mailing list
>>>>>> ARM-allstar at hamvoip.org
>>>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>>>>
>>>>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>>>>>
>>>>>
More information about the ARM-allstar
mailing list