[arm-allstar] Remote connection failed, too slow of a response error

[Doug Crompton]

Dave,

I would say that if your Internet connection is that bad you would not have
reliable VOIP. The initial connection is not high bandwidth. Perhaps there
is another issue as to why you are getting a connection fail. Do you always
get a fail? Using *73<node> will continuously try to connect. Did you try
that?

What kind of pings are you getting to hamvoip.org? allstarlink.org?  Try
running the check_connect.sh script and see what you get. Also check to
make sure you are registered -  check_reg.sh


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Mon, Apr 1, 2019 at 1:19 AM "David Wilcox via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> We have one link that has a slow internet connect at the site, and we get a
> connection failure message   says too long to respond
>
>
>
> We are looking at increasing the speed but my question is
>
>
>
> Is the a setting in a confg file that is changeable to allow for a longer
> time before the connections error happens
>
>
>
> Thanks
>
> KD9BVF
>
> Dave
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>