[arm-allstar] Supermon configuration
ve2gqf at gmail.com
ve2gqf at gmail.com
Mon Sep 24 10:50:58 EDT 2018
Doug,
1 - Than's very much. It's strange, sometime it's works, sometimes not, It's like if supermon doesn't allways try to contact Asterisk manager, no
activity on tcpdump port 5038. Never mind, it's not very important, bubble chart is an other way to what repeater(s) are connected.
2 - Is it possibility to have a list of the repeaters (call sign, frequencies, Allstar number AND coordinates (lat/long). The objective is to make a
GPS format file and add this list in a personnal interest waypoint on a GPS. I'm using this way with DSTAR repeaters when I'm on the road and its very
useful to know the near(s) repeater(s).
73's Gilles
VE2GQF
Le 2018-09-21 à 19:12, "Doug Crompton via ARM-allstar" a écrit :
> Giles,
>
> For the allmon.ini file -
>
> To manage the server supermon is on you would use either that servers IP
> address or usually 127.0.0.1
>
> To manage other servers on your LAN you would specify their local IP
> address.
>
> To manage other servers outside your LAN you would have to use the public
> IP of that remote system and port 5038 would need to be port mapped at that
> remote location.
>
> Instead of an IP address an option that usually works for Public IP's would
> be node#.asnode.org:5038 or 40000.asnode.org:5038 for node 40000
>
> In either the LAN or outside your LAN circumstances you would use
> bindaddr=0.0.0.0 in the manager
>
> All IP addresses would be address:5038
>
> How your VPN effects this I cannot answer.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
>
> On Fri, Sep 21, 2018 at 6:57 PM "ve2gqf--- via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> Doug,
>>
>> It works now, if I indicate in supermon.ini :
>>
>> [47646]
>> host=192.168.2.153:5038 (192.168.2.153 is the RPI IP adress)
>>
>> host=127.0.0.1 doesn't work ! ?
>>
>> bindaddr = 0.0.0.0 in manager.conf
>>
>>
>> Supermon is on the same RPI than Asterisk, and acces to the RPI over a
>> VPN. I have no FW rules :
>>
>> [root at VE2RQF-900 supermon]# iptables -L
>> Chain INPUT (policy ACCEPT)
>> target prot opt source destination
>>
>> Chain FORWARD (policy ACCEPT)
>> target prot opt source destination
>>
>> Chain OUTPUT (policy ACCEPT)
>> target prot opt source destination
>> [root at VE2RQF-900 supermon]#
>>
>> lo is active (!) and has the good address :
>>
>> lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
>> inet 127.0.0.1 netmask 255.0.0.0
>>
>> Is there any other than FW to block loopback access ?
>>
>> Nany thank's for your support Doug,
>>
>> 73's Gilles VE2GQF
>>
>> Le 2018-09-21 à 10:13, "Doug Crompton via ARM-allstar" a écrit :
>>> Giles,
>>>
>>> It sounds like port 5038 is not getting from point A to point B. What is
>>> the path? Do you allow that port through? Is there some firewall setup
>>> limiting it? Do other ports (IAX, SSH) work through this same path?
>>>
>>>
>>> *73 Doug*
>>>
>>> *WA3DSP*
>>>
>>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>>>
>>> On Fri, Sep 21, 2018 at 9:50 AM "ve2gqf--- via ARM-allstar" <
>>> arm-allstar at hamvoip.org> wrote:
>>>
>>>> Thank's Paul,
>>>>
>>>> In fact password was not ***, but I had test with other password
>>>> (uppercase, lowercase) pwd, but there is n change !
>>>>
>>>> Another idea ?
>>>>
>>>> Manager.conf has bindport 0.0.0.0 Yes
>>>> Secret set correctly at both allmon.ini and manager.conf Yes
>>>>
>>>> The RPI is on site, and I have access throut a VPN, no FW on the RPI.
>>>>
>>>> Thank's Gilles VE2GQF
>>>>
>>>>
>>>> Le 2018-09-20 à 08:49, "Paul - KN2R via ARM-allstar" a écrit :
>>>>> Maybe it does not like the characters with asterisk "*" in password.
>>>> Change those and see if it works.
>>>>> Paul / KN2R
>>>>>
>>>>>
>>>>>
>>>>> -----Original Message-----
>>>>> From: ARM-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf
>> Of
>>>> "Doug Crompton via ARM-allstar"
>>>>> Sent: Wednesday, September 19, 2018 11:01 AM
>>>>> To: ARM Allstar
>>>>> Cc: Doug Crompton
>>>>> Subject: Re: [arm-allstar] Supermon configuration
>>>>>
>>>>> Giles,
>>>>>
>>>>> I am not sure what could be wrong. This does work. Did you follow all
>>>> the directions in the howto at hamvoip.org?
>>>>> Manager.conf has bindport 0.0.0.0
>>>>> Secret set correctly at both allmon.ini and manager.conf
>>>>>
>>>>> What is the path for this control? Is it within your LAN or out on the
>>>> Internet?
>>>>> If out on the Internet you need to port forward 5038 TCP.
>>>>>
>>>>>
>>>>> *73 Doug*
>>>>>
>>>>> *WA3DSP*
>>>>>
>>>>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Wed, Sep 19, 2018 at 10:48 AM "ve2gqf--- via ARM-allstar" <
>>>> arm-allstar at hamvoip.org> wrote:
>>>>>> Thank you very much Doug for your response,
>>>>>>
>>>>>> I have made these corrections, without success.
>>>>>>
>>>>>> If it can helps :
>>>>>>
>>>>>> [root at VE2RQF-900 asterisk]# tcpdump port 5038
>>>>>> tcpdump: verbose output suppressed, use -v or -vv for full protocol
>>>>>> decode listening on eth0, link-type EN10MB (Ethernet), capture size
>>>>>> 262144 bytes
>>>>>> 06:55:42.260508 IP VE2RQF-900.51582 > 192.168.27.134.5038: Flags [S],
>>>>>> seq 4033407941, win 29200, options [mss 1460,sackOK,TS val 3964593032
>>>>>> ecr 0,nop,wscale 7], length 0
>>>>>> 06:55:43.265404 IP VE2RQF-900.51582 > 192.168.27.134.5038: Flags [S],
>>>>>> seq 4033407941, win 29200, options [mss 1460,sackOK,TS val 3964594037
>>>>>> ecr 0,nop,wscale 7], length 0
>>>>>> 06:55:45.345406 IP VE2RQF-900.51582 > 192.168.27.134.5038: Flags [S],
>>>>>> seq 4033407941, win 29200, options [mss 1460,sackOK,TS val 3964596117
>>>>>> ecr 0,nop,wscale 7], length 0
>>>>>> 06:56:38.029448 IP VE2RQF-900.51600 > 192.168.27.134.5038: Flags [S],
>>>>>> seq 2964414919, win 29200, options [mss 1460,sackOK,TS val 3964648802
>>>>>> ecr 0,nop,wscale 7], length 0
>>>>>> 06:56:39.115401 IP VE2RQF-900.51600 > 192.168.27.134.5038: Flags [S],
>>>>>> seq 2964414919, win 29200, options [mss 1460,sackOK,TS val 3964649888
>>>>>> ecr 0,nop,wscale 7], length 0
>>>>>>
>>>>>> Another suggestion ?
>>>>>>
>>>>>> 73's Gilles VE2GQF
>>>>>>
>>>>>>
>>>>>> Le 2018-09-18 à 23:21, "Doug Crompton via ARM-allstar" a écrit :
>>>>>>> Giles,
>>>>>>>
>>>>>>> It seems you changed a few lines in manager.conf that did not need
>>>>>>> to be changed and did not change the one line you needed to change!
>>>>>>> Here is
>>>>>> what
>>>>>>> it should look like -
>>>>>>>
>>>>>>> *manager.conf*
>>>>>>> [general]
>>>>>>> displaysystemname = yes
>>>>>>> enabled = yes
>>>>>>> ;webenabled = yes
>>>>>>> port = *5038*
>>>>>>>
>>>>>>> ;httptimeout = 60
>>>>>>> ; a) httptimeout sets the Max-Age of the http cookie ; b)
>>>>>>> httptimeout is the amount of time the webserver waits
>>>>>>> ; on a action=waitevent request (actually its httptimeout-10)
>>>>>>> ; c) httptimeout is also the amount of time the webserver keeps
>>>>>>> ; a http session alive after completing a successful action
>>>>>>>
>>>>>>> ;bindaddr = 127.0.0.1 ; Local interface only!
>>>>>>> bindaddr = 0.0.0.0 ; Not secure
>>>>>>> ;
>>>>>>> ;displayconnects = yes
>>>>>>> ;
>>>>>>> ; Add a Unix epoch timestamp to events (not action responses) ;
>>>>>>> ;timestampevents = yes
>>>>>>>
>>>>>>> [admin]
>>>>>>> secret = *xxxx*
>>>>>>> read = all,system,call,log,verbose,command,agent,user,config
>>>>>>> write = all,system,call,log,verbose,command,agent,user,config
>>>>>>>
>>>>>>> Note - webenabled is commented, disolayconnects is commented and
>>>>>>> most importantly
>>>>>>> bindaddr=0.0.0.0 is uncommented and bindaddr=127.0.0.1 is commented
>>>>>>> without this bindaddr change the manager cannot be accessed outside
>>>>>>> of
>>>>>> this
>>>>>>> server.
>>>>>>> Also note that if you port forward the manager port you could open
>>>>>> yourself
>>>>>>> up to
>>>>>>> security problems. See the supermon howto at hamvoip.org for a
>>>>>>> firewall script to avoid that.
>>>>>>>
>>>>>>>
>>>>>>> *73 Doug*
>>>>>>>
>>>>>>> *WA3DSP*
>>>>>>>
>>>>>>> *http://www.crompton.com/hamradio
>>>>>>> <http://www.crompton.com/hamradio>*
>>>>>>>
>>>>>>> On Tue, Sep 18, 2018 at 9:23 PM "ve2gqf--- via ARM-allstar" <
>>>>>>> arm-allstar at hamvoip.org> wrote:
>>>>>>>
>>>>>>>> Hi Doug,
>>>>>>>>
>>>>>>>> I trying to run supermon on VE2RQF all looks good but I have an
>> issue.
>>>>>>>> Supermon can't connect to Asterisk Manager. there is no firewall,
>>>>>>>> no
>>>>>> port
>>>>>>>> blocked.
>>>>>>>>
>>>>>>>> [ VE2RQF-900 ] [ WAN IP: 70.82.65.122 <
>>>>>>>> http://192.168.27.66/supermon/custom/iplog.txt> ] [ LAN IP:
>>>>>> 192.168.2.153
>>>>>>>> ] [ AstP: 4569 ] [ MgrP: 5038 ] [
>>>>>>>> SShP: 222 ]
>>>>>>>> [ Tuesday, September 18, 2018 EDT 19:16:05 up 2 days, 2:00, 5
>>>>>>>> users,
>>>>>> load
>>>>>>>> average: 0.06, 0.09, 0.09 ]
>>>>>>>>
>>>>>>>> / Node 47646 <http://stats.allstarlink.org/nodeinfo.cgi?node=47646
>>>> =>
>>>>>>>> VE2RQF 927.300- Sherbrooke, Quebec Bubble Chart
>>>>>>>> <http://stats.allstarlink.org/getstatus.cgi?47646> lsNodes <
>>>>>>>> http://192.168.27.66/cgi-bin/lsnodes_web?node=47646> /
>>>>>>>> Node Node Information Received Link Direction
>>>>>>>> Connected Mode
>>>>>>>> Connecting to Asterisk Manager...
>>>>>>>>
>>>>>>>>
>>>>>>>> my config files are below
>>>>>>>>
>>>>>>>> allmon.ini
>>>>>>>> [47646]
>>>>>>>> host=127.0.0.1:*5038*
>>>>>>>> user=admin
>>>>>>>> passwd=*xxxx*
>>>>>>>> menu=yes
>>>>>>>> hideNodeURL=no
>>>>>>>>
>>>>>>>> *manager.conf*
>>>>>>>> [general]
>>>>>>>> displaysystemname = yes
>>>>>>>> enabled = yes
>>>>>>>> webenabled = yes
>>>>>>>> port = *5038*
>>>>>>>>
>>>>>>>> ;httptimeout = 60
>>>>>>>> ; a) httptimeout sets the Max-Age of the http cookie ; b)
>>>>>>>> httptimeout is the amount of time the webserver waits
>>>>>>>> ; on a action=waitevent request (actually its httptimeout-10)
>>>>>>>> ; c) httptimeout is also the amount of time the webserver keeps
>>>>>>>> ; a http session alive after completing a successful action
>>>>>>>>
>>>>>>>> bindaddr = 127.0.0.1 ; Local interface only!
>>>>>>>> ;bindaddr = 0.0.0.0 ; Not secure
>>>>>>>> ;
>>>>>>>> displayconnects = yes
>>>>>>>> ;
>>>>>>>> ; Add a Unix epoch timestamp to events (not action responses) ;
>>>>>>>> ;timestampevents = yes
>>>>>>>>
>>>>>>>> [admin]
>>>>>>>> secret = *xxxx*
>>>>>>>> read = all,system,call,log,verbose,command,agent,user,config
>>>>>>>> write = all,system,call,log,verbose,command,agent,user,config
>>>>>>>>
>>>>>>>> Can you say what I have missed ?
>>>>>>>>
>>>>>>>> Thank's,
>>>>>>>>
>>>>>>>> Gilles ve2gqf
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> ---
>>>>>>>> L'absence de virus dans ce courrier électronique a été vérifiée par
>>>>>>>> le logiciel antivirus Avast.
>>>>>>>> https://www.avast.com/antivirus
>>>>>>>> _______________________________________________
>>>>>>>>
>>>>>>>> ARM-allstar mailing list
>>>>>>>> ARM-allstar at hamvoip.org
>>>>>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>>>>>>
>>>>>>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>>>>>> _______________________________________________
>>>>>>>
>>>>>>> ARM-allstar mailing list
>>>>>>> ARM-allstar at hamvoip.org
>>>>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>>>>>
>>>>>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>>>>> ---
>>>>>> L'absence de virus dans ce courrier électronique a été vérifiée par le
>>>>>> logiciel antivirus Avast.
>>>>>> https://www.avast.com/antivirus
>>>>>>
>>>>>> _______________________________________________
>>>>>>
>>>>>> ARM-allstar mailing list
>>>>>> ARM-allstar at hamvoip.org
>>>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>>>>
>>>>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>>>> _______________________________________________
>>>>>
>>>>> ARM-allstar mailing list
>>>>> ARM-allstar at hamvoip.org
>>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>>>
>>>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>>>>
>>>>> _______________________________________________
>>>>>
>>>>> ARM-allstar mailing list
>>>>> ARM-allstar at hamvoip.org
>>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>>>
>>>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>>> ---
>>>> L'absence de virus dans ce courrier électronique a été vérifiée par le
>>>> logiciel antivirus Avast.
>>>> https://www.avast.com/antivirus
>>>>
>>>> _______________________________________________
>>>>
>>>> ARM-allstar mailing list
>>>> ARM-allstar at hamvoip.org
>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>>
>>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>> _______________________________________________
>>>
>>> ARM-allstar mailing list
>>> ARM-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>
>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
>>
>> ---
>> L'absence de virus dans ce courrier électronique a été vérifiée par le
>> logiciel antivirus Avast.
>> https://www.avast.com/antivirus
>>
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
https://www.avast.com/antivirus
More information about the ARM-allstar
mailing list