[arm-allstar] Audio levels reset to 100 after node reboot
russell at kv4s.com
Fri Sep 14 12:41:44 EDT 2018
Grief, my fault!
I was entering a lowercase w instead of Uppercase "W".
appears to be fine after reboot now.
On Thu, Sep 13, 2018 at 11:45 PM "Doug Crompton via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:
> As was pointed out you must write the changes you make in
> simpleusb-tune-menu using the w command. In fact it reminds you of that if
> you have made changes and try to exit without saving. Changes you do not
> save will remain until you reboot.
> *73 Doug*
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> On Thu, Sep 13, 2018 at 10:39 PM "Russell Thomas via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
> > I got a low audio report on a net last week. Got another report
> > I noticed my Audio level from #2 option in simple USB was at 100 instead
> > what I thought I had of 500. I set it and got someone to verify I sounded
> > better.
> > Tonight, I got another low audio report. Checked and it was back to 100.
> > I set the levels. Got out of the menu came back in and it was still at
> > I set. However, after I rebooted the setting went back to 100.
> > Is anyone else having issues?
> > What do I need to do?
> > _______________________________________________
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
More information about the ARM-allstar