[arm-allstar] Audio levels reset to 100 after node reboot

Doug Crompton wa3dsp at gmail.com
Fri Sep 14 00:43:56 EDT 2018


 As was pointed out you must write the changes you make in
simpleusb-tune-menu using the w command. In fact it reminds you of that if
you have made changes and try to exit without saving. Changes you do not
save will remain until you reboot.

*73 Doug*


*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Thu, Sep 13, 2018 at 10:39 PM "Russell Thomas via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I got a low audio report on a net last week. Got another report Wednesday.
> I noticed my Audio level from #2 option in simple USB was at 100 instead of
> what I thought I had of 500. I set it and got someone to verify I sounded
> better.
> Tonight, I got another low audio report. Checked and it was back to 100.
> I set the levels. Got out of the menu came back in and it was still at what
> I set. However, after I rebooted the setting went back to 100.
> Is anyone else having issues?
> What do I need to do?
> _______________________________________________
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> Visit the BBB and RPi2/3 web page - http://hamvoip.org

More information about the ARM-allstar mailing list