[arm-allstar] IAXRPT

[Glenn]

"Doug Crompton via ARM-allstar" wrote:
> Glenn,
>
>     I am really not understanding what you are saying as it seems you
> contradict yourself.  You say you can connect to either one or link them
> together but then go on to say you cannot connect x to y.
>
> We need more information about what is happening. You need to check the
> routes between the servers. To do this go into the client - item 11 from
> the menu - at the CLI prompt type  rpt lookup node   where node is the node
> of the other server on your LAN you are connecting to. It should show
> something like this -
>
> CLI>rpt lookup 40001
> Node: 40000, Method:   DNS, Actual: LOCAL, Data:
> radio at 192.168.0.151:4568/40001,NONE
>
> These are fake nodes but it shows that the route to 40001 from 40000 is via
> IP 192.168.0.151 at port 4568. If no port is shown it is the default 4569.
>
> You need  to do this at BOTH ends looking at the node that end is
> connecting to. The routing path  should be correct including the port.
>
> If that is correct then you need to monitor in the client while you connect
> from the other end. It will give you debug information that would be
> helpful about the problem.
>
> This has been discussed before if your router has hairpin loopback then you
> should not have to define local routing in the [nodes] section of rpt.conf
> but if you are using the loopback method you will need to have port
> forwarding for each server in your router. Defining node connections to
> each other locally should always work in either case. In the loopback
> method the router based on port forwarding rules and the IP routes one
> local server to the other. When using local routing in Allstar it never
> goes to the router but instead goes directly to the other server on your
> LAN.
>
> Report back what you find.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Sat, Sep 8, 2018 at 9:50 AM "Glenn via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
> This is what I have...
> from node 48541
> glenn*CLI> rpt lookup 47954
> Node: 48541, Method:   DNS, Actual: LOCAL, Data: 
> radio at 192.168.1.113:4569/47954,NONE
> Node:  1999, Method:   DNS, Actual: LOCAL, Data: 
> radio at 192.168.1.113:4569/47954,NONE
> glenn*CLI>
>
> from node 47954
> AllStar1*CLI> rpt lookup 48541
> Node: 47954, Method:   DNS, Actual: LOCAL, Data: 
> radio at 192.168.1.131:4568/48541,NONE
> Node:  1999, Method:   DNS, Actual: LOCAL, Data: 
> radio at 192.168.1.131:4568/48541,NONE
> AllStar1*CLI>
the windows IAXPRT will connect to node 47954 but will not connect to 48541

Glenn k5cod