[arm-allstar] Testing AllStar installation on RP3
Richard Astley
rich at richardastley.com
Sat Sep 8 00:50:20 EDT 2018
Thanks for the welcome and reply Doug, I’ll take a look at iaxrpt tomorrow morning and see if I can get it to work.
In ordered a couple of the CM108 fobs to modify. Not sure on the radio yet. If I plan on keeping a radio less node do I just connect a DTMF mic like the EMS-52 to where the radio would go as per the schematic on hamvoip?
I’ve just bought a Yaesu ft-879. Maybe I can hook this up to a second node in the shack and then use my FT-60 ht to connect to it locally around town?
I’ll let you know how I get on.
Cheers
Rich
Sent from my iPhone
> On Sep 7, 2018, at 09:00, arm-allstar-request at hamvoip.org wrote:
>
> Send ARM-allstar mailing list submissions to
> arm-allstar at hamvoip.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> or, via email, send a message with subject or body 'help' to
> arm-allstar-request at hamvoip.org
>
> You can reach the person managing the list at
> arm-allstar-owner at hamvoip.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of ARM-allstar digest..."
>
>
> Today's Topics:
>
> 1. Testing AllStar installation on RP3 (Richard Astley)
> 2. Re: ARM-allstar Digest, Vol 52, Issue 22 (Ken)
> 3. Re: Testing AllStar installation on RP3 (Doug Crompton)
> 4. zoiper connection fail message (ku6v)
> 5. Re: zoiper connection fail message (Doug Crompton)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 6 Sep 2018 19:08:24 -0700
> From: Richard Astley <rich at richardastley.com>
> To: arm-allstar at hamvoip.org
> Subject: [arm-allstar] Testing AllStar installation on RP3
> Message-ID: <3728FA1B-F04C-4B69-AC49-40DCB44957B1 at richardastley.com>
> Content-Type: text/plain; charset=utf-8
>
> Hi guys,
>
> I?ve just received my RP3 and installed AllStar following the instructions on hamvoip. I?m still waiting for my sound fob to arrive so can?t really progress any further. My plan was to build a simple radio-less node for testing and to keep in the office while connected to the LAN.
> Is there a way I can test I have a good install?
> Can I connect to any other nodes without a radio or DTMF mic?
> Does the RP3 have on board audio that can be used for testing?
> Basically what is the best way of testing what I have done so far?
>
> Cheers
> Rich
> KI6IFN
>
> Sent from my iPhone
>
>
> ------------------------------
>
> Message: 2
> Date: Thu, 6 Sep 2018 22:34:13 -0400
> From: "Ken" <ke2n at cs.com>
> To: <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] ARM-allstar Digest, Vol 52, Issue 22
> Message-ID: <037101d44653$44459df0$ccd0d9d0$@cs.com>
> Content-Type: text/plain; charset="us-ascii"
>
> OK - done. We'll see what happens.
>
> BTW - one of my Ham VOIP systems is a 3B+
> On that one, after an update, I always have to reboot the system to get it
> started up properly. Tonight I had to reboot it twice. It acts like its
> having USB problems, except that one is a hub with no real I/O - pseudo node
> only.
>
> Ken
>
>
>
> Subject: Re: [arm-allstar] one way audio?
> Message-ID:
> <CAMp6vstf-ACJCM5GJ70sPx7kxKXrdx+Am422DaBSGTA35QBS0A at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Ken,
>
> There were some long standing iaxrpt problems in Allstar that have been
> fixed in a recent release. Your node is not updated to fix those problems.
> Please update to the latest version and see if that fixes your problem.
> Also anyone coming in via iaxrpt, zoiper, etc. should have their callerid
> set properly. If it is not the nocid message will appear in supermon and
> other monitoring scripts. If you continue to have problems let us know.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Thu, Sep 6, 2018 at 8:51 PM "Ken via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> This week, just before the club net, someone tried an iaxrpt link to
>> our repeater node. At about the same time, the repeater node detected
>> a problem with the internal (1999) pseudo node that is used for ARRL
> bulletin
>> playback. This caused the system to start spitting lots of error
>> messages
>> into the asterisk message log - a sample follows:
>>
>>
>>
>> [Sep 6 19:23:54] NOTICE[367] chan_iax2.c: Host 174.221.15.181 failed
>> to authenticate as iaxrpt
>>
>> [Sep 6 19:23:56] ERROR[373] app_rpt.c: No link messages from [1999]
>> in 46 seconds -- One way audio??? Forcing reconnect.
>>
>> [Sep 6 19:23:56] WARNING[373] app_rpt.c: Reconnect Attempt to 1999 in
>> process
>>
>> [Sep 6 19:23:58] ERROR[374] app_rpt.c: No link messages from [46931]
>> in 46 seconds -- One way audio??? Forcing reconnect.
>>
>> [Sep 6 19:24:06] WARNING[373] app_rpt.c: Reconnect Attempt to 1999 in
>> process
>>
>> [Sep 6 19:24:16] WARNING[373] app_rpt.c: Reconnect Attempt to 1999 in
>> process
>>
>> [Sep 6 19:24:26] WARNING[373] app_rpt.c: Reconnect Attempt to 1999 in
>> process
>>
>> [Sep 6 19:24:36] WARNING[373] app_rpt.c: Reconnect Attempt to 1999 in
>> process
>>
>> [Sep 6 19:24:38] WARNING[361] chan_iax2.c: Max retries exceeded to
>> host
>> 127.0.0.1 on IAX2/127.0.0.1:4587-11639 (type = 6, subclass = 11,
>> ts=10012,
>> seqno=1)
>>
>> [Sep 6 19:24:45] NOTICE[360] chan_iax2.c: Host 174.221.15.181 failed
>> MD5 authentication for 'iaxrpt' (3d564cd501ff181a271157ffa860774a !=
>> 581ad48b52e8764faac68059890762a8)
>>
>> [Sep 6 19:24:46] WARNING[373] app_rpt.c: Reconnect Attempt to 1999 in
>> process
>>
>> [Sep 6 19:24:48] WARNING[366] chan_iax2.c: Max retries exceeded to
>> host
>> 127.0.0.1 on IAX2/127.0.0.1:4587-11639 (type = 6, subclass = 11,
>> ts=20012,
>> seqno=2)
>>
>> [Sep 6 19:24:48] WARNING[359] chan_iax2.c: Max retries exceeded to
>> host
>> 127.0.0.1 on IAX2/127.0.0.1:4587-9869 (type = 6, subclass = 11,
>> ts=10017,
>> seqno=1)
>>
>> [Sep 6 19:24:49] WARNING[359] chan_iax2.c: Max retries exceeded to
>> host
>> 127.0.0.1 on IAX2/127.0.0.1:4587-11639 (type = 6, subclass = 2,
>> ts=21012,
>> seqno=3)
>>
>> [Sep 6 19:24:55] NOTICE[365] chan_iax2.c: Host 174.221.15.181 failed
>> to authenticate as iaxrpt
>>
>>
>>
>> (and many more)
>>
>>
>>
>> Restarting asterisk did not fix it - I needed to reboot the RPI.
>>
>>
>>
>> This is Firmware Version 1.5rc5-04 August 8, 2018.
>>
>>
>>
>> Any ideas what could be wrong?
>>
>>
>>
>> Ken
>>
>>
>>
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>
> ------------------------------
>
> End of ARM-allstar Digest, Vol 52, Issue 22
> *******************************************
>
>
>
> ------------------------------
>
> Message: 3
> Date: Thu, 6 Sep 2018 23:08:50 -0400
> From: Doug Crompton <wa3dsp at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] Testing AllStar installation on RP3
> Message-ID:
> <CAMp6vss0cFMxOr0qhOcezptxJjeGNcPRRM=WC+t3iGT6vCWpuQ at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Rich,
>
> Welcome to hamvoip Allstar. I think you will like it.
>
> If you have a Windows box you can download iaxrpt - The howto is at the
> hamvoip.org web site.
>
> All you need to do is setup an account in iaxrpt and set your secret if
> you did not already to that at setup for iaxrpt.
>
> This will allow you to connect to your node and then using the DTMF pad in
> iaxrpt to connect to to other nodes or send commands. Of course you also
> need to have speakers and a mic connected to your computer.
>
> You could also do this with an Android phone as there is also a version for
> that. Again the setup procedure can be found in the iaxrpt howto at the
> website.
>
> Other than that be patient and hopefully your FOB will get there. What FOB
> did you order? What radio are you connecting it to?
>
> If you have any problems getting your node going this is the place to ask.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Thu, Sep 6, 2018 at 10:13 PM "Richard Astley via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> Hi guys,
>>
>> I?ve just received my RP3 and installed AllStar following the instructions
>> on hamvoip. I?m still waiting for my sound fob to arrive so can?t really
>> progress any further. My plan was to build a simple radio-less node for
>> testing and to keep in the office while connected to the LAN.
>> Is there a way I can test I have a good install?
>> Can I connect to any other nodes without a radio or DTMF mic?
>> Does the RP3 have on board audio that can be used for testing?
>> Basically what is the best way of testing what I have done so far?
>>
>> Cheers
>> Rich
>> KI6IFN
>>
>> Sent from my iPhone
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>
> ------------------------------
>
> Message: 4
> Date: Thu, 6 Sep 2018 23:06:20 -0700
> From: "ku6v" <ku6v at pacbell.net>
> To: <arm-allstar at hamvoip.org>
> Subject: [arm-allstar] zoiper connection fail message
> Message-ID: <000001d44670$e6b96c20$b42c4460$@pacbell.net>
> Content-Type: text/plain; charset="us-ascii"
>
> Howdy all,
>
> I am getting this message on one node only. The three other nodes allow
> connections. This is a new issue. Until this last week I was able to connect
> via Zoiper and for over a year straight before this. I did opt to pay for
> the extra availability to have more IAX connections installed than the free
> version. Did I maybe setup this account connection incorrectly on Zoiper in
> my phone when I upgraded? Any ideas? I do see radio-secure in the
> extensions.conf file.
>
> I see the following messages in the cli screen.
>
>
>
> [Sep 6 16:57:46] NOTICE[1707]: chan_iax2.c:9170 socket_process: Rejected
> connect attempt from 199.103.53.101, request '41971 at radio-secure' does not
> exist
>
> [Sep 6 16:57:48] NOTICE[1710]: chan_iax2.c:9586 socket_process: Host
> 192.168.1.156 failed to authenticate as myiphone
>
> [Sep 6 16:57:51] NOTICE[1706]: chan_iax2.c:9170 socket_process: Rejected
> connect attempt from 199.103.53.101, request '41971 at radio-secure' does not
> exist
>
> [Sep 6 16:57:56] NOTICE[1710]: chan_iax2.c:9170 socket_process: Rejected
> connect attempt from 199.103.53.101, request '41971 at radio-secure' does not
> exist
>
> [Sep 6 16:58:01] NOTICE[1705]: chan_iax2.c:9170 socket_process: Rejected
> connect attempt from 199.103.53.101, request '41971 at radio-secure' does not
> exist
>
> [Sep 6 16:58:06] NOTICE[1709]: chan_iax2.c:9170 socket_process: Rejected
> connect attempt from 199.103.53.101, request '41971 at radio-secure' does not
> exist
>
> [Sep 6 16:58:11] NOTICE[1703]: chan_iax2.c:9170 socket_process: Rejected
> connect attempt from 199.103.53.101, request '41971 at radio-secure' does not
> exist
>
>
>
> 73
>
> Don
>
> KU6V
>
>
>
>
>
> ------------------------------
>
> Message: 5
> Date: Fri, 7 Sep 2018 09:52:31 -0400
> From: Doug Crompton <wa3dsp at gmail.com>
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Subject: Re: [arm-allstar] zoiper connection fail message
> Message-ID:
> <CAMp6vst3SQTN7_3pnOf24JAN61B9AoRbV3hA9EOBPsO5ksF-oA at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> Because of the changes made to the iaxrpt interface which also applies to
> zoiper I suggest you first do an update of your hamvoip and then reference
> the iaxrpt howto at hamvoip.org section on phone iaxrpt. The interface both
> in the extensions.conf file and in iax.conf would be the same for zoiper.
> You should change to them. Also make sure you have your callerid set to
> your call on your phone.
>
> Also you probably know this but if you are using an Android phone you
> should try iaxrpt from the playstore rather than zoiper as it even with its
> faults is a better package for Allstar.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Fri, Sep 7, 2018 at 3:29 AM "ku6v via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> Howdy all,
>>
>> I am getting this message on one node only. The three other nodes allow
>> connections. This is a new issue. Until this last week I was able to
>> connect
>> via Zoiper and for over a year straight before this. I did opt to pay for
>> the extra availability to have more IAX connections installed than the free
>> version. Did I maybe setup this account connection incorrectly on Zoiper in
>> my phone when I upgraded? Any ideas? I do see radio-secure in the
>> extensions.conf file.
>>
>> I see the following messages in the cli screen.
>>
>>
>>
>> [Sep 6 16:57:46] NOTICE[1707]: chan_iax2.c:9170 socket_process: Rejected
>> connect attempt from 199.103.53.101, request '41971 at radio-secure' does not
>> exist
>>
>> [Sep 6 16:57:48] NOTICE[1710]: chan_iax2.c:9586 socket_process: Host
>> 192.168.1.156 failed to authenticate as myiphone
>>
>> [Sep 6 16:57:51] NOTICE[1706]: chan_iax2.c:9170 socket_process: Rejected
>> connect attempt from 199.103.53.101, request '41971 at radio-secure' does not
>> exist
>>
>> [Sep 6 16:57:56] NOTICE[1710]: chan_iax2.c:9170 socket_process: Rejected
>> connect attempt from 199.103.53.101, request '41971 at radio-secure' does not
>> exist
>>
>> [Sep 6 16:58:01] NOTICE[1705]: chan_iax2.c:9170 socket_process: Rejected
>> connect attempt from 199.103.53.101, request '41971 at radio-secure' does not
>> exist
>>
>> [Sep 6 16:58:06] NOTICE[1709]: chan_iax2.c:9170 socket_process: Rejected
>> connect attempt from 199.103.53.101, request '41971 at radio-secure' does not
>> exist
>>
>> [Sep 6 16:58:11] NOTICE[1703]: chan_iax2.c:9170 socket_process: Rejected
>> connect attempt from 199.103.53.101, request '41971 at radio-secure' does not
>> exist
>>
>>
>>
>> 73
>>
>> Don
>>
>> KU6V
>>
>>
>>
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
>
> ------------------------------
>
> End of ARM-allstar Digest, Vol 52, Issue 23
> *******************************************
More information about the arm-allstar
mailing list