[arm-allstar] New: "NO-CID" reported for IaxRpt and/or Zoiper nodes

[David McGough]

Hi,


The extensions.conf stanza should look like:


[radio-aa4ii]
exten => 47424,1,answer()
exten => 47424,n,Playback(rpt/node)
exten => 47424,n,Playback(digits/4)
exten => 47424,n,Playback(digits/7)
exten => 47424,n,Playback(digits/4)
exten => 47424,n,Playback(digits/2)
exten => 47424,n,Playback(digits/4)
exten => 47424,n,Playback(rpt/connected)
exten => 47424,n,Set(CALLERID(num)=0)
exten => 47424,n,Rpt,47424|Pv|${CALLERID(name)}



73, David KB4FXC


On Tue, 4 Sep 2018, "Robert Forest via ARM-allstar" wrote:

> I added the line you suggested and replaced your node number with mine. I
> confirmed the caller ID in the IAXRPT app. I restarted the server and still
> get No-CID
> 
> Here is the first part of my extensions.conf. Did I get it in the correct
> place?
> 
> 
> [general]
> 
> static=yes       ; These two lines prevent the command-line interface
> writeprotect=yes ; from overwriting the config file. Leave them here.
> 
> [globals]
> HOMENPA=215
> 
> [default]
> exten => i,1,Hangup
> 
> [radio-secure]
> exten => 47424,1,rpt,47424
> exten => 1999,1,rpt,1999
> 
> [radio-secure-proxy]
> exten => 47424,1,rpt,47424|X
> exten => _0X.,1,Goto(allstar-sys|${EXTEN:1}|1)
> 
> [radio-iaxrpt]
> exten=47424,1,Rpt,47424|P
> exten=1999,1,Rpt,1999|X
> 
> 
> 
> [radio-aa4ii] ; Replace YourCall with your call sign.
> exten => aa4ii,1,answer() ; Replace 12345 with your node number in each
> line.
> ; Also replace the digits with your node number.
> exten => 47424,n,Playback(rpt/node)
> exten => 47424,n,Playback(digits/4)
> exten => 47424,n,Playback(digits/7)
> exten => 47424,n,Playback(digits/4)
> exten => 47424,n,Playback(digits/2)
> exten => 47424,n,Playback(digits/4)
> exten => 47424,n,Playback(rpt/connected)
> exten => 47424,n,rpt(47424|P)
> exten => 47424,n,Rpt,47424|Pv|${CALLERID(name)}
> 
> 
> 
> 
> On Tue, Sep 4, 2018 at 8:44 AM "David McGough via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
> >
> > Hi Vendel,
> >
> >
> > A node showing up as (or announcing as) "NO-CID" is a new HamVoIP feature
> > as of the latest release (V1.5.3-42 09/01/2018). This is a bug-fix
> > ---previously, an invalid node identifier was getting stuffed into the
> > node list. Oops!
> >
> > The "NO-CID" node ID will come from IaxRpt or Zoiper connections which
> > aren't fully configured.  To remove the "NO-CID" ID and replace with a
> > correct value, check two config areas.
> >
> > First, make certain the IaxRpt or Zoiper "CallerID" account field is set
> > to the desired node name. For example, I have mine set to: KB4FXC-IAXRPT
> >
> > Second, make certain that the CallerID name field is passed to app_rpt
> > correctly in the /etc/asterisk/extensions.conf file. This is done via the
> > LAST line of the incoming node stanza for IaxRpt or Zoiper. For example:
> >
> >
> > exten => 2345,n,Rpt,2345|Pv|${CALLERID(name)}
> >
> >
> > ...Make sure to replace the 2345 with your actual node number.
> >
> > 73, David KB4FXC
> >
> >
> >
> >
> >
> > Date: Tue, 04 Sep 2018 08:11:00 -0400
> > From: Vendel Boeree <hot96xl at yahoo.com>
> > To: arm-allstar at hamvoip.org
> > Subject: Node no-cid?
> >
> >
> > Hello all. I did an update last night and it seems all is ok. This morning
> > I checked connections with *70 via IAXRPT and the response was my node and
> > "node no-cid". What's that all about?
> >
> >
> >
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>