[arm-allstar] Echolink Connect announcements

[Mike Besemer]

Doug,

 

I came across this page while I was looking for a solution for this issue:  http://docs.allstarlink.org/drupal/node/126

 

Neither echolinkdefault nor echolinkdynamic is available in my Nodes Stanza; only eannmode, which is set to 2.  

 

Would adding echolinkdefault=1 (or 2) resolve my issue?

 

73,

 

Mike

WM4B

 

From: Doug Crompton [mailto:wa3dsp at gmail.com] 
Sent: Saturday, September 1, 2018 7:20 PM
To: Mike Besemer
Cc: ARM Allstar
Subject: Re: [arm-allstar] Echolink Connect announcements

 

Mike,

 

 telemdefault=1 means you will hear all allstar announcements. Is that what you want? telemdefault=2 is the default which means you only hear RF connects and disconnects on your own server followed by a delay and it mutes other telemetry..

 

Perhaps this is not working correctly as Echolink should do the same thing as Allstar.  If you have telemdefault=2 it does not work?




73 Doug

WA3DSP

http://www.crompton.com/hamradio

 

On Sat, Sep 1, 2018 at 6:53 PM Mike Besemer <mwbesemer at cox.net> wrote:

I got it, Doug.  I found an old email trail and set telemdefault=1.  That
look care of it.

Thanks,

Mike
WM4B

-----Original Message-----
From: ARM-allstar [mailto:arm-allstar-bounces at hamvoip.org] On Behalf Of
"Doug Crompton via ARM-allstar"
Sent: Saturday, September 1, 2018 5:24 PM
To: ARM Allstar
Cc: Doug Crompton
Subject: Re: [arm-allstar] Echolink Connect announcements

Mike,

  Echolink like Allstar will only announce on the RF link it is connected
to. It is localplay like other messages. If you have Echolink on a node by
itself without a radio you will not hear it. That is the one downside of
having Echolink on a separate node. It that your scenario?


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Sat, Sep 1, 2018 at 5:08 PM "Mike Besemer via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Is anyone else not hearing Echolink Connect announcements?  I has eannmode
> in rpt.conf set to 1 and was hearing nothing.  Just reset it to eannmode=2
> and did an ASTModule/RPT Reload via SuperMon and still don't hear any
> connection announcements.
>
> Mike
> WM4B
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org