[arm-allstar] CTCSS detect ping-pong - stumped

[Jay Urish]

And now you have 2 audio paths.

The internal path and the external path through the controller.


On 10/29/18 8:04 PM, "Robert Conklin via ARM-allstar" wrote:
> Hi Ryan, am accessing the signals thru the 96 pin MRTI backplane connector
> via an adapter board made for external controller adaptation for the
> MTR2000 made by www.ICS-CTRL.com.
>
> Found & fixed the problem. I had assumed that the MTR would need to be
> programmed into base station mode with an external controller running the
> show. By programming into repeater mode while turning off all internal
> controller ID functions, all is working perfectly. I super appreciate
> everyone who chimed in!
> --
> Robert Conklin
> *N4WGY <http://qrz.com/db/N4WGY>*
>
>
> On Sat, Oct 27, 2018 at 1:30 PM "Ryan Gross via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>> Hi,
>>
>> What connector on backplane are you using for COS and CTCSS ?  try looking
>> at the northcomm technologies website mark had a write up about how to
>> program the mtr2000/3000 and some additional grounding points to resolve
>> similar issues.
>>
>>
>>
>> Ryan n3ssl
>> _______________________________________________
>>
>> ARM-allstar mailing list
>> ARM-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org