[arm-allstar] Allstar Link Audio

[Bryan St Clair]

Adjust the RX and TX levels.

400 could be too high for your setup.

On Mon, Oct 15, 2018, 19:07 "Lonny Barry via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I have also just found the following
>
> Winsystem audio to the node and out to the HT is overdriven
>
> Winsystem audio to the node and out to the iaxrpt client is crystal clear
> with perfect levels.
>
> Thanks
> Lonny
>
> On Mon, Oct 15, 2018, 7:12 PM Lonny Barry <kg5igj at gmail.com> wrote:
>
> > My audio from the allstar link is way over driven. I'm trying to figure
> > out what setting would correct this?
> >
> > Node :
> >
> > RPi 3b+ / Asterisk 1.5.3_42   <--> RIM Lite USB Fob <- DB9 -> UV-5r Plus
> >
> > HT and IAXrpt on Android
> >
> > Put the node in Parrot mode not connected to any other node.
> >
> > Key the HT and tx "Audio Test"
> >
> >      crystal clear audio at perfect levels.
> >
> > Force the node to Say the Time, or Force ID
> >
> >      crystal clear audio at perfect leves
> >
> > Key the IAXrpt on the android and the HT returns audio so over driven its
> > barely readable.
> >
> > RX level set at 400
> >
> > TX A and B both at 400
> >
> > rxboost disabled.
> >
> > What else? What have I not thought of?
> >
> > Thanks in advance.
> >
> > Lonny
> > KG5IGJ / 48448
> > Lake Jackson, TX
> >
> >
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>