[arm-allstar] Auto wpa_supplicant on first boot

[David McGough]

Hi,

On the HamVoIP image, you could mount the SD card on another Linux system 
and place the pre-configured wpa_supplicant info in this file:

/etc/wpa_supplicant/wpa_supplicant_custom-wlan0.conf

Also, you can pre-configure the other network settings by adjusting these 
files:

For wired Ethernet:
/etc/systemd/network/eth0.network

For WiFi:
/etc/systemd/network/wlan0.network


I do this all the time...

73, David KB4FXC



On Wed, 10 Oct 2018, "Gerry Filby via ARM-allstar" wrote:

> Howdy,
> 
> Raspbian Stretch allows one to drop a configured wpa_supplicant file in 
> the root of your fresh image.  Upon first boot the file is transferred 
> to /etc/... and the Pi comes up on whatever WiFi one configured.
> 
> I gave it a try on the Hamvoip image and it doesn't seem to work ?  Did 
> I mess up somewhere ? ... or is this just not supported in the current 
> implementation.  I understand Hamvoip is based on Archlinux not 
> Raspbian, but it would simplify that first startup process.
> 
> Cheers !
> 
> Gerry
> W6WNG
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>