[arm-allstar] Cannot play an audio file on a DUPLEX=0 node

Doug Crompton wa3dsp at gmail.com
Fri Nov 23 17:42:17 EST 2018


Roger,

 Yes, if you need some selected telemetry try duplex=1.  Turn off the
courtesy tone - nounkeyct=1  if you don't want any connect/disconnect
messages set telemdefault to 0.  The default is 2 which only says your
connect/disconnect message not those from others connecting/disconnecting.
You will have to experiment to see what works best for you.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Fri, Nov 23, 2018 at 3:53 PM "Roger Coudé via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> That particular node is a simple transceiver in a private house giving
> access to a remote repeater at the end of a 1000 km branch.I use it as a
> end-to-end test. For our emergency network we privilege RF links, internet
> is used as a backup.
> Many of our sites are a combination of repeaters and transceivers.So we
> also intensively use duplex=0 on transceivers talking to backbone repeaters.
> If you remember, I am the one who asked for the RXondelay with blockage
> after TX.Is the negative value would also work on other than duplex=0
> node?If I understand well, you suggest to use duplex=1 and set hangtime to
> 0 and disable courtesy tone?
> I just want to be sure the transmitter will not transmit at all after Rx
> and also keep the anti ping pong.Roger
>
>
>       De : Doug Crompton via ARM-allstar <arm-allstar at hamvoip.org>
>  À : ARM Allstar <arm-allstar at hamvoip.org>
> Cc : Doug Crompton <wa3dsp at gmail.com>
>  Envoyé le : vendredi 23 novembre 2018 13h45
>  Objet : Re: [arm-allstar] Cannot play an audio file on a DUPLEX=0 node
>
> Roger,
>
>  In duplex=0 mode telemetry is disabled. Thats just the way it works and is
> intended to work. Why do oyu need duplex=0? You can turn off courtesy tone
> and connect messages with other commands.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
> On Fri, Nov 23, 2018 at 10:17 AM "Roger Coudé via ARM-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > I would like to use localplay to play an audio file (example: test from
> > VE2EYD) on a DUPLEX=0 node to check if a link is good.Actually the only
> > thing that I can output is the astrpt version, all other commands are
> > muted.73RogerVE2DBE
> > _______________________________________________
> >
> > ARM-allstar mailing list
> > ARM-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org


More information about the ARM-allstar mailing list