[arm-allstar] Node Can't Connect

[Doug Crompton]

This would tend to indicate a network connection problem. I assume others
can connect to you and that your port forwarding is working? For Allstar
BOTH ends need to know how to connect to the other end. Have him do a
dns-query to you node number and you do one to his. Make sure the IP
addresses and ports it is using to connect both ways are correct. Also are
you both using the latest hamvoip code? Can you connect to him from your
hub?


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Fri, Nov 16, 2018 at 7:41 PM "Sean McCarthy via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> I have a friend (46029) that cannot connect in to my "hub" (43732) but
> seems to be able to connect to others. AST log has many of the following
> errors while trying to connect to 43732:
>
> [Nov 16 18:47:48] NOTICE[352] chan_iax2.c: Auto-congesting call due to slow
> response [Nov 16 18:47:54] WARNING[360] app_rpt.c: Reconnect Attempt to
> 43732 in process
>
> Any idea what might be happening?
>
> Notes:
> - 43732 has no less than 5 incoming nodes connected at any given time
> - All nodes on this "network" are dual registered, including 46029
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>