[arm-allstar] Update V1.5-3.47

[Doug Crompton]

An update has gone out V1.5.3-47  to fix the Windows IAXRPT problem of not
being able to send DTMF when the remote command mode is turned off which it
is by default. With this update users of Windows IAXRPT can npw send DTMF
commands but not remote *4 commands unless it is activated in rpt.conf on a
per node basis with the command -

remote_dtmf_allowed=1

If this command is left out or =0  remote commands cannot be executed on
your server which is the default and secure way to run your server. Anyone
that turned this command on =1 to temporarily correct the Windows IAXRPT
problem should either remove the command or change it to =0 to regain
security on your nodes.

Sorry for the inconvenience. Windows IAXRPT DTMF was appearing as remote
DTMF and causing it to be flagged.

Additional Items in this update -

Supermon  - When using the rpt stats and adding a node number the logo now
displays and does not display an error.

Added/updated scripts -

AutoSky -

 Logs now go to /tmp/AUTOSKY. This can be redirected in AutoSky.ini with a
$AutoSky_log= parameter if needed.  This avoids unneeded writes to  the SD
card.  Added a coverage area text parameter for display in Supermon or
wherever warnings are displayed.

# County or area for display
Coverage_Area="Bucks County, PA"

If left blank or undefined no area displays.  The above would display like
this in Supermon

Bucks County, PA - [ Tornado Warning ]

whatsmyhardware.sh  -  Tells you the specifics of your Raspberry Pi hardware

Updated Script -

allstar_ssh.sh  -  added code to differentiate between local ond public IP
addresses.

Added in /usr/local/sbin/example_scripts directory -

test_alert.sh  -  Example script to trigger FOB GPIO bit when there is an
alert.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*