[arm-allstar] DTMF to link nodes?

[David McGough]

Steve,

This works on a per-node basis; put the statements in each node stanza you 
want to adjust.

73, David KB4FXC



On Fri, 16 Nov 2018, "Steve Agee via ARM-allstar" wrote:

> Where in "simpleusb.conf" does this parameter belong? Under [global] or 
> can it be customized on a per node basis when operating 2 nodes on one Pi?
> 
> N5ZUA
> 
> On 10/25/2018 12:17 AM, "Doug Crompton via ARM-allstar" wrote:
> > dtmf_dsp  command in simpleusb.conf.  By default it is set to 1 and this is
> > the case if this command is NOT in the simpleusb.conf file. Placing the
> > command in the file and setting to =2 would turn off muting and the DTMF
> > level would show up. Do NOT forget to remove the command or set it back to
> > =1 when you are done!
> >
> > dtmf_dsp=0    ; NO allstar command decoding, DTMF pass thru
> > dtmf_dsp=1    ; Normal Allstar DTMF decoding and muting - this is the
> > default
> > dtmf_dsp=2    ; BOTH normal Allstar DTMF decoding AND DTMF pass thru. No
> > muting
> >
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>