[arm-allstar] DTMF to link nodes?

[Steve Agee]

Where in "simpleusb.conf" does this parameter belong? Under [global] or 
can it be customized on a per node basis when operating 2 nodes on one Pi?

N5ZUA

On 10/25/2018 12:17 AM, "Doug Crompton via ARM-allstar" wrote:
> dtmf_dsp  command in simpleusb.conf.  By default it is set to 1 and this is
> the case if this command is NOT in the simpleusb.conf file. Placing the
> command in the file and setting to =2 would turn off muting and the DTMF
> level would show up. Do NOT forget to remove the command or set it back to
> =1 when you are done!
>
> dtmf_dsp=0    ; NO allstar command decoding, DTMF pass thru
> dtmf_dsp=1    ; Normal Allstar DTMF decoding and muting - this is the
> default
> dtmf_dsp=2    ; BOTH normal Allstar DTMF decoding AND DTMF pass thru. No
> muting
>