[arm-allstar] Smart Switch

[David McGough]

Eric,

Without knowing more about the topography of your network, it's hard to 
say what exactly may be wrong. I'm suspecting a routing or NAT issue is 
the culprit.

If you're running on a private network, you might consider some type of
VPN tunneling back to a central router. I use openvpn for this
extensively. If the network is completely private, ipip or gre work well,
too...And, there is wireguard now becoming available, which a really slick
crypto tunnel tool, but is new enough it may not be available on all your
platforms....(Personally speaking, I usually fall back to IPsec as the
crypto tool of last resort).


73, David KB4FXC



On Sat, 10 Nov 2018, "Eric Harrison via ARM-allstar" wrote:

> Doug, Recently  I have been playing with the AREDN firmware & ubitiqui NanoStations. I have successfully 
made a node work and register across the 2.4 ghz AREDN network. I have added a ubitiqui tough switch
at the user end and now have problems registering. I can ping yahoo.com and everything that sets on the same 
global IP address but can not ping any of my other nodes that set on a different Global IP.  Not sure why
this has changed with a smart switch in line.


Eric (N7JYS) Marshall's Communications
_______________________________________________

ARM-allstar mailing list
ARM-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org