[arm-allstar] Telemetry

[James R. Pilgram]

Mahalo Doug,

As always you answered all the questions, including the ones I should 
have asked... !

Aloha,

JimNH6HI

On 11/3/18 3:54 PM, "Doug Crompton via ARM-allstar" wrote:
>   Is there a easy way to turn off all telemetry for linking a simplex node
> to a repeater?
>
> Jim NH6HI
>
> Jim,
>
>   There are different ways to do this. If you set duplex=0 it turns off all
> telemetry except cwid. You can also set nounkeyct=1 with duplex=1 to stop
> the courtesy tone. You also have rxondelay in simpleusb-tune-menu that can
> help if you have a ping pong effect AFTER doing these other things.
>
> You did not say exactly what you wanted to do but if you are using the
> simplex node as a connection to a repeater that does not have Internet and
> you have access to the repeater the best way is to make the repeater output
> PL directly follow its input PL. Then you will have no repeater tail or ID
> going out over Allstar. I do this with a repeater here and it works well.
> The repeater still has an ID and tail which is not heard by anyone unless
> they have receive PL turned off. What the repeater users hear is the PL and
> tail of the simplex node. This works well but of course is half duplex at
> the repeater but if the repeater does not have Internet access it is
> probably the best way to do it short of putting (if you can) a 'Ubiquity'
> link to the repeater site for Internet.
>
> If that doesn't answer your question you need to be more specific.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org