[arm-allstar] Vox with Hamvoip version

[Chris]

I changed the “carrier from” to equal vox in usbradio.conf but there is no radio tune menu in etc/asterisk.
Only the simpleusb is available.

> On Nov 3, 2018, at 6:46 PM, David McGough <kb4fxc at inttek.net> wrote:
> 
> 
> Hi Chris,
> 
> VOX in rpt.conf??   I'm not familiar with that directive for rpt.conf??
> 
> usbradio does have a VOX mode, and it is supported in the HamVoIP release. 
> However, you may be disappointed with the performance.
> 
> To try out VOX mode, these settings are in the usbradio.conf file by 
> setting carrierfrom=vox.  Here is one page with more info:
> 
> https://allstarlink.org/usbradio.html
> 
> 
> 73, David KB4FXC
> 
> 
> 
>> On Sat, 3 Nov 2018, "Chris via ARM-allstar" wrote:
>> 
>> I saw “usbradio.conf.xxx” in there, but vox is not an option in rpt.conf.
> 
> Do I add the line back to rpt.conf and use usbradio?
> 
> Chris
> 
>> On Nov 3, 2018, at 2:48 PM, Chris Hood <chood73 at yahoo.com> wrote:
>> 
>> Is there a way to put Vox back into the 1.5 version?
>> I have a special case that requires Vox. The plain old ASL has it in USB radio, but I want to use the Ham VOIP version.
>> 
>> I know I could build a simple Vox circuit, but that just adds another point of failure.
>> 
>> Thanks,
>> Chris
>> WB4ULK
>> 
>> The village idiot
> 
> _______________________________________________
> 
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>