[arm-allstar] SuperMon Load Average

[Doug Crompton]

Run top at the Linux prompt and try to determine what is using the
resources.  I have found that generally even on a load hub the load
averages stay below .5


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*

On Sat, Nov 3, 2018 at 12:08 PM "Mike Besemer via ARM-allstar" <
arm-allstar at hamvoip.org> wrote:

> Good morning all,
>
> I'm curious what I should be seeing for Load Averages on a 'normal' node?
>
> One of my nodes, which currently does not even have a FOB connected, reads
> significantly higher than my other three.  I thought I might have a bad
> image, so I burned a new one on a difference SD Card with the same results.
>
>
>
> Node 1:  load average: 0.22, 0.13, 0.09
> Node 2:  load average: 0.17, 0.09, 0.09
> Node 3:  load average: 0.18, 0.11, 0.09
> Node 4:  load average: 1.35, 0.78, 0.33
>
> Aside from the fact that this appears totally out of whack, it is also
> running significantly hotter than the rest of the nodes (naturally),
> although putting a fan on it does bring it down into the 30 C area.
>
> I kind of think I've got a bad PI.
>
> Mike
> WM4B
>
> _______________________________________________
>
> ARM-allstar mailing list
> ARM-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>