[arm-allstar] My Node is auto kerchunking

[David]

Yes it's your COS line, measure the voltage.
-------- Original message --------From: Rory Bowers via arm-allstar <arm-allstar at hamvoip.org> Date: 5/26/18  7:58 PM  (GMT-06:00) To: ARM Allstar <arm-allstar at hamvoip.org> Cc: Rory Bowers <k6cks01 at gmail.com> Subject: Re: [arm-allstar] My Node is auto kerchunking 
I don't believe this is the case Doug.  The node is connected to a Repeater
Controller port.  The radio is a 100 Watt G.E. MASTR II Repeater Station.
The repeater can be sitting with no traffic and suddenly the COS on the
Node will kerchunk.  I am wondering if anyone else has experienced this.
Thanks for the reply!

Rory, K5CKS

On Sat, May 26, 2018 at 7:49 PM, "Doug Crompton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> It is more than likely RF feedback. If you are using a Baofeng 888 you need
> to get the antenna away from the radio - coax to an antenna 5-10 feet away.
> The other option if it is a local node is to put it on a dummy load. 2 - 1
> Watt 100 ohm carbon resistors would work fine.
>
> In severe cases there is an rxondelay in simpleusb-tune-menu that delays
> COS. By default it is 0. Each value up is an additional 20ms delay. This is
> a realtime adjustment so you can raise it one value at a time to see it it
> helps but best to eliminate the feedback problem.
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Sat, May 26, 2018 at 5:41 PM, "Rory Bowers via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > I have not been able to figure this one out.  My node is "auto
> > kerchunking".  I turned the IDer off and set the ID time interval to 0.
> > With no connections it still kerchunks itself.  I have not determined the
> > time interval yet.  Any ideas?
> >
> > Rory, K5CKS
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
_______________________________________________

arm-allstar mailing list
arm-allstar at hamvoip.org
http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar

Visit the BBB and RPi2/3 web page - http://hamvoip.org