[arm-allstar] Courtesy Tones
Russell Thomas
russell at kv4s.com
Mon May 21 05:22:46 EST 2018
Thanks for this as I was also interested in stopping them.
Does this also stop the connect/disconnect node announcements?
On Sun, May 20, 2018, 10:08 PM "Brad Trogdon via arm-allstar" <
arm-allstar at hamvoip.org> wrote:
> Figured it out... Below is my resolution "if" anyone trying to remove
> Courtesy Tone for RF side only. Didn't get any replies to my question I
> assume because not many need this configuration. I had to resolve because
> it was confusing to the users as when one stopped transmitting the repeater
> would drop then a double would occur because the replying station would
> start talking and then AllStar would key to transmit the Courtesy Tone.
>
> My settings:
>
> rpt.conf
>
> duplex=1 ;SIMPLEX NODE that feeds AllStar into repeater via
> link radio. No internet at repeater site.
> nounkeyct=1 ; Removes RF side courtesy tone (remotetx) - Link Side
> still transmits (CT8) 5/20/18 -BFT
>
>
> Hope this helps others and have a great week!
>
> -Brad
> W4INT / WQTG303
>
>
> On Sun, May 20, 2018 at 1:39 PM, Brad Trogdon <Brad at trogdon.org> wrote:
>
> > <<Re-posting with additional info included.>>
> >
> >
> > Hello all I am using latest version (*HamVoIP AllStar Version - Asterisk
> > 1.4.23-pre.hamvoip-V1.5.3-31-app_rpt-0.327-04/17/2018*) and trying to
> > configure so courtesy tone fires on repeater for users over the link
> (Does
> > work - Transmits *CT8*) but when users speak on my repeater (RF) another
> > courtesy tone fires (Transmits *remotetx*). (This I want to stop)
> >
> > My configuration is as a Remote Node.
> >
> > duplex=1
> >
> > Question How can I stop the courtesy tone for local (RF Users) and
> > continue it for Linked users?
> >
> > A hint may be: Hungup 'DAHDI/pseudo-<*Random 9 digits*>' that logs each
> > time the courtesy tone I want to prevent fires.
> >
> > I also reconfigured remotetx=|t(0,0,1,0) which removes the tone however
> > the link radio still keys.
> >
> > Any guidance that can be offered would be greatly appreciated. At
> present
> > turning off all telemetry is my only option and that is less than desired
> > due to the other functionality that is lost as a result.
> >
> > Thanks in advance.
> >
> > -Brad
> > W4INT
> >
> >
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
More information about the arm-allstar
mailing list