[arm-allstar] Courtesy Tones

[Brad Trogdon]

Figured it out...  Below is my resolution "if" anyone trying to remove
Courtesy Tone for RF side only.   Didn't get any replies to my question I
assume because not many need this configuration.   I had to resolve because
it was confusing to the users as when one stopped transmitting the repeater
would drop then a double would occur because the replying station would
start talking and then AllStar would key to transmit the Courtesy Tone.

My settings:

rpt.conf

duplex=1                ;SIMPLEX NODE that feeds AllStar into repeater via
link radio.  No internet at repeater site.
nounkeyct=1          ; Removes RF side courtesy tone (remotetx) - Link Side
still transmits (CT8)  5/20/18 -BFT


Hope this helps others and have a great week!

-Brad
W4INT / WQTG303


On Sun, May 20, 2018 at 1:39 PM, Brad Trogdon <Brad at trogdon.org> wrote:

> <<Re-posting with additional info included.>>
>
>
> Hello all I am using latest version (*HamVoIP AllStar Version - Asterisk
> 1.4.23-pre.hamvoip-V1.5.3-31-app_rpt-0.327-04/17/2018*) and trying to
> configure so courtesy tone fires on repeater for users over the link (Does
> work - Transmits *CT8*) but when users speak on my repeater (RF) another
> courtesy tone fires (Transmits *remotetx*).  (This I want to stop)
>
> My configuration is as a Remote Node.
>
> duplex=1
>
> Question How can I stop the courtesy tone for local (RF Users) and
> continue it for Linked users?
>
> A hint may be:  Hungup 'DAHDI/pseudo-<*Random 9 digits*>' that logs each
> time the courtesy tone I want to prevent fires.
>
> I also reconfigured remotetx=|t(0,0,1,0) which removes the tone however
> the link radio still keys.
>
> Any guidance that can be offered would be greatly appreciated.  At present
> turning off all telemetry is my only option and that is less than desired
> due to the other functionality that is lost as a result.
>
> Thanks in advance.
>
> -Brad
> W4INT
>
>