[arm-allstar] courtesy tones while node connected

[Doug Crompton]

I think you are confusing the courtesy tone you hear when you unkey and the
tone you would hear when a remote link unkeys. The nounkeyct only mutes the
local CT when RF is unkeyed locally. The remote unkeyct still exists. As
far as I know the only way to get rid of it is to turn off telemetry -
duplex=0 in rpt.conf for the node you do not want any audio feedback from.


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Fri, May 11, 2018 at 12:22 PM, "Jeff Karpinski via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I have an HT parked on node A’s freq. I am absolutely 100% hearing the
> standard AllStar unkey tone when I transmit on node B.
>
> Now is this a possible factor? Both nodes ARE hung off the same Raspberry
> Pi. Node A is attached to my Kenwood TM-V71A and node B is radioless. Node
> A has nounkeyct=1, node B has nounkeyct=0.
>
>
> > On May 11, 2018, at 10:12 AM, Doug Crompton via arm-allstar <
> arm-allstar at hamvoip.org> wrote:
> >
> > Courtesy tones are ALWAYS local. If you turn it off on node A, then you
> > will not hear it on node A. If you connect to node A from node B and
> listen
> > on node B you are hearing node B's courtesy tone NOT anything coming from
> > node A. The control of courtesy tones is local. It does not effect any
> > other nodes courtesy tone.
> >
> >
> > *73 Doug*
> >
> > *WA3DSP*
> >
> > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> >
> >
> > On Fri, May 11, 2018 at 12:07 PM, "Jeff Karpinski via arm-allstar" <
> > arm-allstar at hamvoip.org> wrote:
> >
> >> I thought courtesy tones weren’t passed over the net? I’ve got one node
> >> with nounkeyct=1 set and it’s quiet as can be when keyed up directly via
> >> RF, as expected. When I join this node from a 2nd node however, courtesy
> >> tones are heard on BOTH nodes when the 2nd node keys.
> >>
> >> I’m trying to use this 1st node as a frequency-variable gateway for
> other
> >> connecting nodes. Already have the ability to change the host radio
> freq,
> >> but repeater owners (and users) rather frown on hearing foreign courtesy
> >> tones. How can I get node one to suppress ALL AllStar related tones?
> >> _______________________________________________
> >>
> >> arm-allstar mailing list
> >> arm-allstar at hamvoip.org
> >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >>
> >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org