[arm-allstar] AllStar/IRLP

[Ronald Foster]

That’s what I wanted to know! 

Thanks Doug.

Ron

> On May 9, 2018, at 4:33 PM, Doug Crompton via arm-allstar <arm-allstar at hamvoip.org> wrote:
> 
> The answer is yes, IRLP and Allstar/Echolink can be bridged (connected
> together) based on the restrictions of the protocol. In the case of IRLP
> only one connection in or out to many on Allstar and Echolink. This of
> course assumes you have IRLP installed and a valid IRLP node setup.
> 
> 
> *73 Doug*
> 
> *WA3DSP*
> 
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> 
> 
> 
> 
> On Wed, May 9, 2018 at 4:06 PM, "Ronald Foster via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
>> Doug, I may not have made myself clear.
>> 
>> I’m wondering about connecting at the same time. Not independently of each
>> other. As I commented, AllStar and IRLP were linked at the same time.
>> 
>> How can each mode work at the same time, if they share a single HT/Pi?
>> 
>> Understand?
>> 
>> Thanks Doug.
>> 
>> Ron
>>> On May 9, 2018, at 1:58 PM, Doug Crompton via arm-allstar <
>> arm-allstar at hamvoip.org> wrote:
>>> 
>>> Ron,
>>> 
>>> You can only connect to one IRLP node or reflector at a time but you can
>>> have many nodes connected on the Allstar side. Incoming IRLP would
>> connect
>>> as long as no other IRLP is connected. The number of Allstar connects has
>>> no bearing on it.
>>> 
>>> 
>>> *73 Doug*
>>> 
>>> *WA3DSP*
>>> 
>>> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>>> 
>>> 
>>> On Wed, May 9, 2018 at 8:12 AM, "Ronald E Foster via arm-allstar" <
>>> arm-allstar at hamvoip.org> wrote:
>>> 
>>>> I’m curious about the AllStar-IRLP modes running together.
>>>> 
>>>> The other day, I mistakenly linked to an IRLP node while linked to an
>>>> AllStar node. I immediately dropped the IRLP connection before using it,
>>>> but now I’m curious how that would have impacted the modes while both
>> were
>>>> linked through my node.
>>>> 
>>>> I’m also curious about an IRLP node connecting to my AllStar IRLP node.
>>>> Would a traditional IRLP node receive a busy when requesting a link, if
>> I
>>>> were already linked to say... 27225 monitoring the hub or would my node
>>>> need to be idle in both modes?
>>>> 
>>>> Thanks for any enlightening on this topic.
>>>> 
>>>> Ron, K0AAJ
>>>> AllStar 42545
>>>> IRLP 4100
>>>> _______________________________________________
>>>> 
>>>> arm-allstar mailing list
>>>> arm-allstar at hamvoip.org
>>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>>> 
>>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>> _______________________________________________
>>> 
>>> arm-allstar mailing list
>>> arm-allstar at hamvoip.org
>>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>> 
>>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>> _______________________________________________
>> 
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org