[arm-allstar] Allstarlink Sip Bridge working?

[Doug Crompton]

Jeff,

 As far as I know the sip bridge is no longer working. I had it setup in my
PBX long ago and it did work at one time. DNS currently does not resolve
for sip.allstarlink.org.

You can setup your PBX to connect to any Allstar server though using iax
assuming you have control of both ends. Here is an example -

PBX end extensions.conf -

[radio-connect]
exten => 595,1,Wait(1)
exten => 595,n,Dial(IAX2/telephone_dialin:password at 192.168.0.151/27225)
exten => 595,n,Hangup

exten => 596,1,Wait(1)
exten => 596,n,Dial(IAX2/telephone_dialin:password at 192.168.0.154:4556/29014)
exten => 596,n,Hangup

Where password is the password at the other end and IP and port if not 4569
to the Allstar server.  This could be out on the Internet somewhere as long
as you had proper port forwarding. Mine is shown local.

At remote Allstar server end in iax.conf -

[telephone_dialin]
type=user
secret=password     ;<< change this
disallow=all
allow=ulaw
allow=g726aal2
allow=gsm
codecpriority=host
context=radio-control
transfer=no

Its that simple!



*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*




On Tue, May 8, 2018 at 11:33 AM, "Jeffrey Lehman, KC8QCH via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> HI all,
>
>      This might be slightly off topic, but I hope related enough. I have
> been working on a VOIP PBX for Home and am adding some Ham Radio goodies
> for me. I have been able to get my Allstar Node connected to it (BOY did I
> make that harder then it needed to be. If I would just have read what was
> right in front of me I would have saved myself a day but I learned alot in
> the process.....) and now I wanted to add the Allstarlink Telephone Portal
> Sip Bridge as well. Does anyone know if that is still up and running? I
> added it as a trunk to Freepbx based on the settings I could find online,
> but I don't know if those settings are still good because when I activate
> the trunk, the asterisk CLI spews a ton of errors at me about not being
> able to connect or resolve the address.
>
>     The settings I found and tried were:
>
> IP Address:    sip.allstarlink.org (67.215.233.178)
> Username:    1
> Password:    allstar
> codec:    G711 Ulaw
> DTMF:    RFC2833 (If applicable)
>
> Thanks.
>
>        Jeff
>
> --
> Jeff Lehman, KC8QCH
> kc8qch at gmail.com
>
> Webmaster
> Hamilton County ARPSC
> http://www.hamcoarpsc.org
> hamcoarpsc at gmail.com
>
> AllStar 47374 Node Administrator
> World Wide Amateur Radio Guild
> https://theguildglobal.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org