[arm-allstar] 2nd node on a Pi

[Jeff Karpinski]

Yeah, I discovered iax.conf shortly after posting. Both nodes registered now. 

Thanks.


> On May 5, 2018, at 9:00 PM, Doug Crompton via arm-allstar <arm-allstar at hamvoip.org> wrote:
> 
> The information is in:
> 
> https://www.hamvoip.org/config-setup.pdf
> 
> Also available at hamvoip.org in the howto section.
> 
> I will admit this howto really needs updating but all the information is
> there it just might not be perfectly clear. Here are the steps:
> 
> Use nano search and replace  (control \) to edit  rpt.conf and
> extensions.conf and replace all 1999 with your new second node number.
> 
> Edit iax.conf and add a registration line below the current first node line
> for your second node with the node number and node password from
> allstarlink.org
> 
> Edit simpleusb.conf and add a second stanza for your second node. Call it
> [usb2] or whatever you want but this same name must be
> defined in rpt.conf in the rxchannel= line for the new node which by
> default is pseudo. Comment that out and activate the simpleusb line with
> the stanza name you defined in simpleusb.conf.
> 
> Carefully follow the start up method for two nodes at the end of the howto.
> Physical ports are then saved so if you pull the usb lines you must plug
> things back into the same physical ports or things will get reversed or not
> work.
> 
> If you need more clarification let me know.
> 
> 
> *73 Doug*
> 
> *WA3DSP*
> 
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> 
> 
> 
> 
> On Sat, May 5, 2018 at 9:20 PM, "Jeff Karpinski via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
> 
>> Followed the directions on https://www.hamvoip.org/config-setup.pdf <
>> https://www.hamvoip.org/config-setup.pdf> for a 2nd node setup.
>> Everything seems to be working fine locally but there’s got to be more to
>> the process as I never entered the 2nd node’s password and
>> http://stats.allstarlink.org/ <http://stats.allstarlink.org/> does not
>> show it active. Is there more complete 2nd node setup instructions
>> somewhere?
>> _______________________________________________
>> 
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>> 
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org