[arm-allstar] Registration fails

[David McGough]

If you've having registration failures, previously everything worked 
fine, and nothing has changed, try completely powering off the RPi node 
and lead it down for 5+ minutes. Then power it back up. Hopefully it will 
register at this point.

The reason for leaving it powered down for so long is that it gives the 
registration server time to flush out any old data about your earlier 
connection. Then, many times, everything will work okay again.

73, David KB4FXC



On Sat, 5 May 2018, "Chris Zenchenko via arm-allstar" wrote:

> For me here today and not registered as well.
> Ping register.allstarlink.org returns fine.
> Check_reg.sh fails.
> 
> 
> -----Original Message-----
> From: arm-allstar <arm-allstar-bounces at hamvoip.org> On Behalf Of "Doug
> Crompton via arm-allstar"
> Sent: Saturday, May 5, 2018 4:08 PM
> To: ARM Allstar <arm-allstar at hamvoip.org>
> Cc: Doug Crompton <wa3dsp at gmail.com>
> Subject: Re: [arm-allstar] Registration fails
> 
> Larry,
> 
>  Is this a new issue today - Saturday? Some of the Allstar servers are
> undergoing maintenance today. This is not under our control. Check to see
> if you are registered - check_reg.sh   The status server might be down and
> if it is it has no bearing on whether you can connect as long as you are
> registered. If this persists later this evening then let us know.
> 
> 
> *73 Doug*
> 
> *WA3DSP*
> 
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*