[arm-allstar] ilink commands

[David McGough]

Greg,

It seems like your rpt.conf is different from the base file that gets
released with the HamVoIP distro, since the 71, 72, and 73 commands can't
be found.

Take a look at your /etc/asterisk/rpt.conf file. I'll use node number 1998
as the example node number. First, you'll see a functions= statement in   
your node stanza. Something like:
 
[1998]
;
; Config statements
;
functions=functions1998
;
; More config statements
;


Now, take a look at the [functions1998] stanza. This is where the 71, 72, 
and 73 commands (and more) are configured. Something like:

[functions1998]
;
; Statements
;

 ;  disconnect permanently connected link = *71<node>
71=ilink,11
 ; connect link permanent monitor = *72<node>
72=ilink,12
 ; connect link permanent transceive = *73<node>
73=ilink,13
 ; play full system status

;
; More statements
;

73, David KB4FXC





On Fri, 4 May 2018, "Greg via arm-allstar" wrote:

> Thanks for the info, however chk_reg.sh is not found, which directory 
> will that be in? Also, iax2 show registry shows that we are registered. 
> Also I CAN connect out with *3<node> and likewise disconnect with 
> *1<node> and hear the output. It is only *71, *73 and possibly others 
> that don't output anything od perform their intended function.
> 
> _______________________________________________
> 
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> 
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>