[arm-allstar] ilink commands

[Doug Crompton]

Sorry for the misinformation - it is check_reg.sh

Unless you have messed with the rpt.conf file functions  *71 and *73 are
defined and do nothing more than perform the same functions as *1 and *3
only in a permanent way meaning connections will be re-established if the
link is interrupted or the node you are connected to restarts or reboots.

Your functions stanza in rpt.conf should have the following standard
defines at the beginning -

1=ilink,1
2=ilink,2
3=ilink,3
4=ilink,4
5=macro,1

70=ilink,5
71=ilink,11
72=ilink,12
73=ilink,13
75=ilink,15
76=ilink,6
77=ilink,16
78=ilink,18



*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Fri, May 4, 2018 at 10:04 AM, "Greg via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Thanks for the info, however chk_reg.sh is not found, which directory will
> that be in? Also, iax2 show registry shows that we are registered. Also I
> CAN connect out with *3<node> and likewise disconnect with *1<node> and
> hear the output. It is only *71, *73 and possibly others that don't output
> anything od perform their intended function.
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>