[arm-allstar] rf link to repeater

[John Simmons]

Kevin,

This is a difficult situation. I would suggest you gather all the 
equipment at one place, make it all work and THEN install it at the 
respective sites. When you have everything at one place you can observe 
what happens under each condition. Been there, done that.

73,
-John NI0K

"Kevin Halton via arm-allstar" wrote:
> I am attempting to setup a link to a remote repeater in the area  and so far
> have had zero luck. The node is operating without issues as a simplex rf
> node. I change the freq. to the repeater pair and set tone. When I transmit
> from another linked node the audio is heard on the repeater and transmitted
> out via RF, BUT the audio coming back from the repeater never makes it into
> the network back here. So if someone keys the repeater up the nodes
> connected to the network never hear that traffic.I have enc/dec set to match
> the repeater, frequency is set correctly. What am I missing?
>
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org