[arm-allstar] Can someone listen to this?

[Doug Crompton]

Mike,

   I am not sure what you are doing there. What radio are you interfacing
to? What circuit are you using? What FOB are you using? Did you modify the
FOB?


*73 Doug*

*WA3DSP*

*http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*


On Sun, Mar 25, 2018 at 1:58 AM, "Michael Staggs via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> I’m making great progress with my node. When I plug the pi in, it shows up
> on allstarlink as active. I had problems with it holding PTT down and just
> clicking. So, I added the resistor, transistor and diode on PTT as in the
> schematic. Now, however, I’m getting this. I told it to give me the
> status…or maybe the time. Instead, I got these short little transmissions
> of clicks. You can hear it here:
>
> https://instaud.io/1X0q
>
> On receive, I already have the 10k resistor. Is this because I didn’t add
> the 47k resistor and 10uf capacitor before it goes to the FOB? Or is this
> completely different? I really don’t want to keep buying electronic
> supplies if it’s not going to work anyway, but if it’s truly what’s causing
> this then I will buy them. I have a 68k resistor and 100uf capacitor, but
> those won’t work, will they?
>
> Sent from Mail for Windows 10
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org