[arm-allstar] broadcastify

[wl7lp at wl7lp.com]

 Hello Doug, 

Thanks for the reply. 

]# ezstream -qvc /etc/ezstream.xml
ezstream: Warning: /etc/ezstream.xml is group and/or world readable
ezstream: Connected to http://audio1.broadcastify.com:80/r5d1vztfc9b8
ezstream: Streaming from standard input

that's what I get with that command. 

from my ezstream.xml file 

<ezstream>
<url>http://audio1.broadcastify.com:80/r5d1vztfc9b8</url>
<sourcepassword>xxxxxxxxx</sourcepassword>
<format>MP3</format>
<filename>stdin</filename>
<svrinfoname>WL7LP IRLP Node 7369 and Reflector 9109</svrinfoname>
<svrinfourl>http://www.radioreference.com/</svrinfourl>
<svrinfogenre>Amateur Radio</svrinfogenre>
<svrinfodescription>Alaska Morning Net Feed </svrinfodescription>
<svrinfobitrate>16</svrinfobitrate>
<svrinfochannels>1</svrinfochannels>
<svrinfosamplerate>22050</svrinfosamplerate>
<svrinfopublic>1</svrinfopublic>
</ezstream>

it's reporting online again, but still with no audio.

73 Russ WL7LP
Alaska Morning Net - Net Manager
IRLP node 7369, AllStar 29332
http://wl7lp.comQuoting Doug Crompton via arm-allstar <arm-allstar at hamvoip.org>:

> Russ,
>
>  Run ezstream manually to make sure your xml file is working correctly and
> you are logging in.
>
> Stop it from running in Allstar - comment it out and reboot. then enter -
>
> /usr/local/bin/ezstream -qvc /etc/ezstream.xml
>
> ?at the command line. The howto instructions are at the hamvoip.org site.
> It looks like everything is loading. You did setup an account and created
> the /etc/ezstream.xml file correct? That file is touchy. It has to be
> created correctly so running i manually as above will tell you if it is
> working correctly.?
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
>
> On Wed, Mar 14, 2018 at 8:46 AM, "Russ via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>>
>>
>> I am have trouble with broadcastify. I spent a fews days trying to get it
>> to work. it is reporting on line. however there is no audio being heard
>> from it. I have followed the how to. in rpt.conf I have added in the node
>> section
>>
>>  outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8
>> --bitwidth 16 - - 2> /tmp/stream.status | /usr/local/bin/ezstream -qvc
>> /etc/ezstream.xml
>>
>> doing a ps ax it reports
>>
>>   603 ?        S      0:00 /bin/sh -c /usr/bin/lame --preset cbr 16 -r -m
>> m -s 8 --bitwidth 16 - - 2> /tmp/stream.status | /usr/local/bin/ezstream
>> -qvc /etc/ezstream.xml
>>   604 ?        S      0:01 /usr/bin/lame --preset cbr 16 -r -m m -s 8
>> --bitwidth 16 - -
>>   605 ?        S      0:00 /usr/local/bin/ezstream -qvc /etc/ezstream.xml
>>
>> I am at a loss at this point. normally I like to figure stuff out on my
>> own and get things to work. but at this point nothing seems to work getting
>> audio to broadcastify maybe I'm overlooking something?
>>
>> 73 Russ WL7LP
>> Alaska Morning Net - Net Manager
>> IRLP node 7369, AllStar 29332
>> http://wl7lp.com
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org