[arm-allstar] broadcastify

[wl7lp at wl7lp.com]

 mine is also 0.6.0 version....broadcastify been reporting that it's on line  but with no audio.   now it saids it's offline and I made no changes yet lol.

73 Russ WL7LP
Alaska Morning Net - Net Manager
IRLP node 7369, AllStar 29332
http://wl7lp.comQuoting David McGough via arm-allstar <arm-allstar at hamvoip.org>:

>
> The current ezstream version released with HamVoIP is 0.6.0 and it works
> properly.  Originally I used a much later version, which didn't work with
> the current config file format, etc.
>
> [root at hamvoip-kb4fxc channels]# ezstream -V
> ezstream 0.6.0
>
>
> 73, David KB4FXC
>
>
> On Wed, 14 Mar 2018, "Mark Johnston via arm-allstar" wrote:
>
>> I think at one time the version of ezstream was a problem if you are on the
> hamvoip code...
> I use DIAL but here is the line as I have it.
>
> *outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8
> --bitwidth 16 - - | /usr/bin/ezstream -qvc /etc/ezstream2295.xml*
>
> I have no issues with that...
>
> *mark# ezstream -V*
>
> *ezstream 0.5.6*
>
>
> 73's
>
> Mark KC7DMF
>
>
>
> **** North West Hub Allstar Node 2295 <http://www.markjohnston.us/nwhub>
> ****
>
> "Got Root?"
>
> How many software engineers does it take to change a light bulb?
> *None. It's a hardware problem.*
>
> The best way to accelerate a computer running Windows is at 9.81 m/s².
>
> *"I get paid to support Windows, I use Linux to get work done."*
>
>
> On Wed, Mar 14, 2018 at 5:46 AM, "Russ via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
>>
>>
>> I am have trouble with broadcastify. I spent a fews days trying to get it
>> to work. it is reporting on line. however there is no audio being heard
>> from it. I have followed the how to. in rpt.conf I have added in the node
>> section
>>
>>  outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8
>> --bitwidth 16 - - 2> /tmp/stream.status | /usr/local/bin/ezstream -qvc
>> /etc/ezstream.xml
>>
>> doing a ps ax it reports
>>
>>   603 ?        S      0:00 /bin/sh -c /usr/bin/lame --preset cbr 16 -r -m
>> m -s 8 --bitwidth 16 - - 2> /tmp/stream.status | /usr/local/bin/ezstream
>> -qvc /etc/ezstream.xml
>>   604 ?        S      0:01 /usr/bin/lame --preset cbr 16 -r -m m -s 8
>> --bitwidth 16 - -
>>   605 ?        S      0:00 /usr/local/bin/ezstream -qvc /etc/ezstream.xml
>>
>> I am at a loss at this point. normally I like to figure stuff out on my
>> own and get things to work. but at this point nothing seems to work getting
>> audio to broadcastify maybe I'm overlooking something?
>>
>> 73 Russ WL7LP
>> Alaska Morning Net - Net Manager
>> IRLP node 7369, AllStar 29332
>> http://wl7lp.com
>> _______________________________________________
>>
>> arm-allstar mailing list
>> arm-allstar at hamvoip.org
>> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>>
>> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>