[arm-allstar] Courtesy Tone Mapping

[William Freeman]

Yes, I had missed that step. I guess that's what happening when you're
running Field Day, setting a Brandmeister machine, and doing this. Sorry,
everyone! Got the function working. It's GREAT!!

On Sat, Jun 23, 2018 at 10:29 PM, "Doug Crompton via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Bill,
>
>  Did you read the howto? It is clearly defined in there.
>
> https://hamvoip.org/hamradio/arm-allstar/documents/howtos/
> distinctive_courtesy_tones_howto.pdf
>
>
> *73 Doug*
>
> *WA3DSP*
>
> *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
>
>
> On Sun, Jun 24, 2018 at 12:35 AM, "William Freeman via arm-allstar" <
> arm-allstar at hamvoip.org> wrote:
>
> > So it should look like this? Because it’s still not working and I defined
> > the K in the telemetry.
> >
> > Sent from my iPhone
> >
> > William Freeman
> >
> > > On Jun 23, 2018, at 6:17 PM, Doug Crompton via arm-allstar <
> > arm-allstar at hamvoip.org> wrote:
> > >
> > > Bill,
> > >
> > > It goes in the defines of the local node you want it to work in.
> Putting
> > > it in the courtesy tone mapping section is the proper place. The actual
> > > tone mapping is done in the telemetry stanza.
> > >
> > >
> > > *73 Doug*
> > >
> > > *WA3DSP*
> > >
> > > *http://www.crompton.com/hamradio <http://www.crompton.com/hamradio>*
> > >
> > >
> > > On Sat, Jun 23, 2018 at 7:17 PM, "William Freeman via arm-allstar" <
> > > arm-allstar at hamvoip.org> wrote:
> > >
> > >> Good afternoon, all. I am confused by this direction: "
> > >>
> > >> *To complete the mapping you need to assign a specific node number or
> > >> numbers to a corresponding tone definition. Here is an example: *
> > >>
> > >> *node40000=ct12 *
> > >>
> > >> *ct12 does not exist in the current definition so it must be defined
> > down
> > >> in the telemetry stanza of rpt.conf. Here is an example of defining a
> > Morse
> > >> CW “K” as the courtesy tone for node 40000 *
> > >>
> > >> *ct12=|iK *
> > >>
> > >> *multiple node definitions can be made either pointing at the same or
> > >> different courtesy tones."*
> > >>
> > >> Does the definition, in the example above node40000=ct12, go
> underneath
> > the
> > >> telemetry section where the actual courtesy tones are dictated in
> terms
> > of
> > >> pitch and rhythm, or somewhere else?
> > >>
> > >>
> > >> Thanks
> > >>
> > >> bill n4njj
> > >>
> > >> --
> > >> William Freeman
> > >> _______________________________________________
> > >>
> > >> arm-allstar mailing list
> > >> arm-allstar at hamvoip.org
> > >> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >>
> > >> Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > > _______________________________________________
> > >
> > > arm-allstar mailing list
> > > arm-allstar at hamvoip.org
> > > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> > >
> > > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> > _______________________________________________
> >
> > arm-allstar mailing list
> > arm-allstar at hamvoip.org
> > http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
> >
> > Visit the BBB and RPi2/3 web page - http://hamvoip.org
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>



-- 
William Freeman