[arm-allstar] Last update failed

[Sean McCarthy]

FWIW, I updated 6 nodes on the 27th or 28th (whenever the big update was) 1
of the 6 did exactly this. Ultimately I had to re-image the card and start
over. Good thing you have your backups, right?



On Thu, Jun 7, 2018 at 9:12 PM "David McGough via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

>
> Hi,
>
> Is the RPi3 booted and running or nothing at all?
>
> As of this point, we've had 1000+ users update to the latest version,
> including the kernel update. So, this is very unusual.
>
>
>
> 73, David KB4FXC
>
>
> On Fri, 8 Jun 2018, "Jeff via arm-allstar" wrote:
>
> > Ran the update option as i normal do remotely via SSH login but this
> time it never came back. Drove to the site and found it no longer supports
> wireless and asterisk not running.
> Any ideas where to start looking?
>
>
> Pursuant to U.S. Code, title 47, Chapter 5, Sub-chapter II, ß227, "Any
> and all non-solicited commercial E-mail sent to this address is subject to
> a download and archival fee of $500.00 U.S.". E-mailing denotes acceptance
> of these terms.
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>
> _______________________________________________
>
> arm-allstar mailing list
> arm-allstar at hamvoip.org
> http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar
>
> Visit the BBB and RPi2/3 web page - http://hamvoip.org
>