[arm-allstar] Two nodes on the same network won't connect to

[ssedgwick]

Thanks Sean,  that’s good to know.

Steve_WB8GRS

Just a note. You will now probably find these nodes will not connect when
on separate networks.

I did this for my personal node when I was at home but found it would no
longer connect when away from home, so it was of little use for me...

On Sun, Jul 22, 2018 at 1:15 PM, "ssedgwick via arm-allstar" <
arm-allstar at hamvoip.org> wrote:

> Thanks David.  It worked...
>
> Steve_WB8GRS
>
> -Nano rpt.config-Go to the end of the file. You will see ip config
> Example, must do it for each node:
> 12345 = radio at 192.168.001/12345,NONE54321 = radio at
> 192.168.002:4570/54321,NONE
> www.hamviop.org has instructions.
>
>
> Sent from my T-Mobile 4G LTE Device
> -------- Original message --------From: ssedgwick via arm-allstar
> <arm-allstar at hamvoip.org> Date: 7/21/18  9:44 PM  (GMT-06:00) To:
> arm-allstar at hamvoip.org Cc: ssedgwick <ssedgwick at suddenlink.net>
> Subject: Re: [arm-allstar] Two nodes on the same network won't connect to
> Not sure how to do that?  Where are the configuration settings I need to
> change?
>
> Thanks,
> Steve_WB8GRS